05-07-2024, 11:13 AM | #1 |
Enlisted Member
17
Rep 44
Posts |
Need some help of measuing suspension height
Hey everyone, I’ve noticed that the default suspension height seems lower than before. The suspension is functioning properly and adjusts height at each level. Could someone measure the distance between the upper wheel well and the tire? I can fit a can(on the side) of soda in between with little space left.
Picture attached. At default level. The wheel is 22”. Thank you very much. I need to know this for my sanity. |
05-07-2024, 12:19 PM | #2 |
Brigadier General
1517
Rep 3,599
Posts |
i have 22s. have this documented since i just went through a leaking shock that would sink the whole car when left long enough.
on level ground: drivers side ground to top of wheel arch, ~33.25" drivers side, ~33.0" passengers side, from ground to top of wheel arch centered on the hub. this is normal driving level, comfort mode.
__________________
Present: 2023 G07 40i ZDH/ZDU/ZMP/ZMQ/2NH/ZPK/ZPP/ZRC/300/3AC
Past: 2013 335i 6MT ZMM/ZDH/ZTP/3AG/494/508 Past: 2016 F34 335i xDrive ZCW/ZDA/ZDH/ZTP/ZMP/2V5/5DL Past: 2019 G01 M40i ZDA/2VF/ZPP/ZPX/688/3AC |
Appreciate
1
newbimmerx717.00 |
05-13-2024, 02:04 PM | #4 |
Captain
515
Rep 629
Posts |
I wonder if the auto-leveling feature of the suspension could be making a difference here? I have occasionally noticed when parked on non-level pavement that the front/rear wheel wells have different gaps.
|
Appreciate
0
|
05-13-2024, 02:13 PM | #5 | |
Brigadier General
1517
Rep 3,599
Posts |
Quote:
if those are 285/45/22, they will be taller than stock
__________________
Present: 2023 G07 40i ZDH/ZDU/ZMP/ZMQ/2NH/ZPK/ZPP/ZRC/300/3AC
Past: 2013 335i 6MT ZMM/ZDH/ZTP/3AG/494/508 Past: 2016 F34 335i xDrive ZCW/ZDA/ZDH/ZTP/ZMP/2V5/5DL Past: 2019 G01 M40i ZDA/2VF/ZPP/ZPX/688/3AC |
|
Appreciate
0
|
05-15-2024, 01:12 AM | #6 |
Enlisted Member
17
Rep 44
Posts |
Sorry for not mentioning earlier. I run 22inch wheels square setup. Those are PS4 tires
|
Appreciate
0
|
05-15-2024, 06:44 AM | #7 | |
Brigadier General
1517
Rep 3,599
Posts |
Quote:
your ride heights look right, mine is a little lower, but the dealer had just calibrated the ride height as part of the faulty air suspension work ( they replaced the air supply system and one shock)
__________________
Present: 2023 G07 40i ZDH/ZDU/ZMP/ZMQ/2NH/ZPK/ZPP/ZRC/300/3AC
Past: 2013 335i 6MT ZMM/ZDH/ZTP/3AG/494/508 Past: 2016 F34 335i xDrive ZCW/ZDA/ZDH/ZTP/ZMP/2V5/5DL Past: 2019 G01 M40i ZDA/2VF/ZPP/ZPX/688/3AC |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|