|
Hi everyone,
Finally, I got all the parts for the retrofit and I'm almost ready to start.
My only concern before starting with the retrofit is the FEM harness change.
I have the German version of the F31 and the tutorial from kapkanimd is written for the US version. It seems pretty much the same, but comparing to Doni's post, there are two different pins:
US version (kapkanimd):
Move pin 26 from connector A173*2B to ---> pin 53 in connector A173*3B
Move pin 34 from connector A173*3B to ---> pin 41 in connector A173*3B
Move pin 51 from connector A173*3B to ---> pin 53 in connector A173*4B
Move pin 39 from connector A173*3B to ---> pin 54 in connector A173*4B
EU version (DoNi):
Move pin 26 from connector A173*2B to ---> pin 53 in connector A173*3B
Move pin 34 from connector A173*3B to ---> pin 41 in connector A173*3B
Move pin 49 from connector A173*4B to ---> pin 53 in connector A173*4B
Move pin 37 from connector A173*4B to ---> pin 54 in connector A173*4B
Can anyone confirm if DoNi's scheme is correct for the EU version? As anyone tried it?
Many thanks
|