Quote:
Originally Posted by wren57
Yup. It's the same part number and exact same part. They could be wrong, but I was told that during operation they spin different directions. So one clockwise and one counter. When you switch them they switch which way they rotate, so they are "fresh" turning that direction. If that makes any sense. Only way I can think to describe it is say you have a hose plugged into the wall. If you spin it clockwise 100 times it's going to be kinked. Start spinning it the other way and it's much easier to spin back to neutral. Same concept with the solenoids, the wear of spinning the same direction all the time is reversed when you swap them. Could be broscience but makes sense to me.
|
Damn bro you just made it complicated into impossible lol
I'm going to remove them clean them and basically put each one in different rotation position yes?