Quote:
Originally Posted by ChiBimmer
Where would you recommend starting with handling and suspension mods?
|
Contrary to popular belief on these forums I would recommend changing out the run flats last.
I would start with the dampers first. If you want a little drop then springs too. I have experience with bilstein HD dampers and BMW performance springs and can highly recommend the setup. I have a review somewhere on the forum. After the dampers/springs I would do rear subframe bushings. Either whiteline inserts or M3 bushings. Then I would fine tune with tires and bigger wheels if you desire. Just make sure you get the proper offsets or you enter a new set of problems with fitment and rubbing. This car has a bad suspension feel from the factory but can be corrected easily with a little cash. I did my suspension first then went for the go fast mods. In my opinion 400whp on the stock setup is a little dangerous.