Quote:
Originally Posted by Joe240
So because you'd be shaving it away and adding a steel sleeve that would retain more heat, the engine would then run to hot? I'm just making sure I understand why the bore/sleeve option wouldn't work  |
I sleeve is a lot thicker than the coating is
http://www.2addicts.com/forums/attac...4&d=1484021499
Due�to�the�thin�material�application�during�the�el ectric�arc�wire-spraying�procedure,�subsequent
machining�of�the�cylinder�barrels�is�not�possible.
P20 touches upon it