View Single Post
      12-09-2016, 03:16 PM   #19
M2wolf
Captain
M2wolf's Avatar
No_Country
183
Rep
791
Posts

Drives: M2 Manual
Join Date: Sep 2014
Location: Berks

iTrader: (0)

Quote:
Originally Posted by DKM3Power View Post
No like I said, I had the 35s for the front bc thats all i could find at the time...They looked so bad I got 22 offsets in front...skip ahead in the journal. if u do 9.5 and 10.5 instead of stock 9 and 10" widths....Right there they will sit same as 7.5mm spacers, then 35 rear is 5mm more agressive than stock, and they make them in 9.5" with offset of 22...stock is 30 so brtween increased width and 8mm lower off set...They will sit where the stocks would with a 15mm spacer but very concave both front and rear...

And after I started performance mods....traction became a real issue...so a 10.5 or even 11" rear with some good traction rating draa radials ('Im going 275/34/19...Maybe even a 285/30/19)

Thats what i highly recommend...
Starting to sound pretty complex now..

Ok, so the fronts from my VFF103s is not ideal. The rears are fine.

Which sized VFF103 fronts should I get pls ?

Lastly, can I reuse the stock tyres? If not which sized recommend tyres?

Thanks!
__________________
YMB F80 M3 DCT (Gone but never forgotten)
AW F87 M2 6MT (Current whip)
Appreciate 0