Quote:
Originally Posted by xueju1121
I did some testing. It can only be enabled on software version 7/2019 and above. I have 3/2019 and it doesn't work.
|
That thread shows the following code to enable:
>>These are the required codes for Assisted Driving View:
DKOMBI:
CB_FZG_UMGEBUNG_FAS: aktiv [01]
CB_PRESELECT_NAVI_ANSICHT_FZG_UMGEBUNG: aktiv [01]
PIA_FZG_UMGEBUNG_FAS: aktiv [01]
SICHT_ABSICHT_ENABLE: aktiv [01]
Pre-Requisites:
- i-Step 2019_07.x
- 5AU DAP
Confirmed working on:
- UK G05 with i-step 2019_07.47
- AUSY G05 with i-step 2019_07.39
>>I have 07/2019.47 on my G07 2019. Is it possible to use it in BimmerCode in the Expert Mode? Does it require any special ECU to be enables first?
