Wanted to post up my new wheel/tire setup that I'm totally stoked on!
Picked these up from Fitment Industries and had a really good experience with their customer service team who kept in touch with me throughout the whole process. Would definitely order wheels from them again.
Tires:
Decided to go with the 295/30/19 Goodyear Supercar3 for tires after running Bridgestone RE71R's on my old setup (19x10 +28 square with 285/35/19).
Fitment:
The 295/30/19 Supercar 3 is an extremely wide tire! It has 11.9" of section width and 11.2" of tread so clearance on the strut is a big issue. I ended up needing 25mm of spacer to make these fit giving me an effective offset of +10mm in the front. I have the Ground Control Coilover Sleeve kit which I think helps give me a little more room to help too. The good news is that these don't rub anywhere on the inner fenders fore and aft of the wheel since the tire is only 26" tall, which was an issue with the 285/35/19 RE71R. There is some poke but I run around -4.0deg of camber so the tire looks like it *should* took up under the fender in a heavy impact. Rear fitment is perfect with this setup, no spacers required.
Other Notes:
This is a track setup where my goal was to fit as much tire as possible on the front of the car and keep a square setup. I don't think it will be possible to go any larger than this wheel/tire combo on the front of the car without moving on from the stock fenders. The grip feels absolutely insane at both ends of the car now, I can't wait to see how this setup does at Mid-Ohio this weekend!
