Quote:
Originally Posted by SingleturboVert
Report back  |
Not sure if it's placebo but tightening the front exhaust support near the downpipe may have reduced it a little. Over some of the bigger bumps I still hear the same thuds coming from the mid to rear section. I tried my best to crawl under and check both clamps near the muffler and they seem to be inserted and bolted on properly. Only thing I didn't try tightening is the support brace in the center as I couldn't find what type of bolt that was and it was getting dark.
I just tightened the front support a little with a breaker bar. Didn't know if I should go tighter. It was pretty loose but idk if that's the bolt or just the breaker bar doing its job. Is there a torque spec I should get that to with a torque wrench?