[The Choosey begger]

Originally Posted by dmnc02

The fastest way (if you do not have anything coded) is to remove 2VB (Tyre Pressure Monitor) from your FA and VO code ICM, DSC, FEM_BODY, KOMBI and HU_NBT.

If you do not want to VO code the above ECUs in order to keep some other codings, you can alternatively undo the following FDLs:

<<< CAFD_0000067B.caf.002_012_000  (ICMQL) >>>
ICMQL > Daten 3000 > IcmKod_B_S2VBA = verbaut 

<<< CAFD_00001A33.caf.001_003_002  (DSC_CT02M) >>>
DSC_CT02M > DSC_CODIERDATEN_ALLGEMEIN 3000 > C_Funktion_RDCi_l = aktiv 
DSC_CT02M > DSC_CODIERDATEN_ALLGEMEIN 3000 > C_Funktion_RPA_e = nicht_aktiv 
DSC_CT02M > DSC_CODIERDATEN_RPA_CONTI 3002 > C_RPA_Extra = nicht_aktiv 

<<< CAFD_00000794.caf.015_041_025  (FEM_01) >>>
FEM_01 > RemoteControl 30D0 > RC_RDC_ENABLE = aktiv 

<<< CAFD_000009C8.caf.006_003_053  (KOMBI L7_MID) >>>
KOMBI L7_MID > ERM_Konfiguration 3004 > ST_TYR_RDC_ALIVE = aktiv 
KOMBI L7_MID > ERM_Konfiguration 3004 > ST_TYR_RDC_TIMEOUT = aktiv 
KOMBI L7_MID > FZG_Ausstattung 3003 > DSC_MIT_RPA = ohne_RPA [Default]

<<< CAFD_00001EF6.caf.006_018_007  (HU_NBT_EVO) >>>
HU_NBT_EVO > EXBOX 3001 > RDC = aktiv 
HU_NBT_EVO > EXBOX 3001 > RDC_DRUCK_TEMP = druck 
HU_NBT_EVO > EXBOX 3001 > RDC_FORTSCHRITTSANZEIGE = nicht_aktiv [Default]
HU_NBT_EVO > EXBOX 3001 > REIFENUEBERWACHUNG_RDC_RPA = rdc 
HU_NBT_EVO > EXBOX 3001 > RPA = nicht_aktiv

Thanks!