|
Retrofitting Cruise Control - Not able to code it
Hi All,
Recieved my cable and cruise control switch today for my 2014 Nov- F45 Active Tourer. Installed the steering wheel switch without any problem.
But while coding;
Added the 544 in SALAPA Element, Saved Changes, Calculated FA, Saved the new FA, Loaded the saved FA and calculated the FA again, wrote FA FP.
Then Read and Activated FA and Read ECU (Read SVT gives error message therefore I used Read ECU) in order to VO Code Kombi, FEM and ICM.
However I could not find KOMBI, FEM and ICM. Therefore Selected each ECU under the tree and coded all of them. (I received one error message due to coding DME ECU while engine is on, but fixed it later)
There is no warning light on the dashboard now, but the retrofitted Cruise Control does not work. LIM button is still working on the other hand.
Any idea what is going on and what I messed up?
Here are the ECUs under SVT tree: ACSM2(1),BDC_BODY(40),BDC_GW(10),BKOMBI(60),DME_BA C(12),DSC2(29),EGS(18),EPS(30),FLE(43),FLE(44),FZD (56),HKFM(d),HU_ENTRYNAV(63),ICAM2(6),IHKA3(78),PM A2(2c),TCB(61),ZBE3(67)
Thanks
|