Quote:
Originally Posted by iconoclast
Did you order the plastic plugs and screws to secure it in place?
|
There is no separate part number for the two plastic screws that keep the tray secured. The expanding rivets that you see in the parts diagram link I provided above are to keep the two side pieces in place, which you already have installed in the car. If you take a look at the pic you posted in your original post, you can see the difference between the plastic screw in the tray and the expanding rivet on the side piece.
I will speculate that the two plastic screws on the tray are integrated into the tray - hence no separate part numbers. I have seen this before with other similarly constructed parts. If not, I will figure something out after I get the tray....
This link shows a better shot of the two side pieces (and the 3 expanding rivets per side) with the tray lifted up. You can also see the bottom side of the integrated screws in the tray as well...
https://g07.bimmerpost.com/forums/sh...39&postcount=2