Does this seem a little odd?
Dinan Performance Spring Set:
"Lowers vehicle with BMW sport suspension by 3/8" in front and 1/2" in back. Vechicle with "normal" suspension is lowered 7/8" in front and 1" in back. Body roll is decreased from higher spring rates (+20% in front and +30% in rear.) This spring set can also be used with camber plates, but front will be 1/4" higher than without camber plates.)"
All the other spring sets (H&R, Eibach, etc) specs say that the front is lower more than the rear, but this one is the rear is lowered more than the front...any thoughts as to why?
|