Quote:
Originally Posted by ScottSinger
Best to take the plastic engine cover off.
(while facing the windshield) on right side of coolant tank below the plastic circumference seam, on the rearward 1/3 is an inverted triangle with a similar width horizontal line at the apex. That's the minimum level.
At the center of the coolant tank same side is a triangle with base on the bottom and it's similar width horizontal line at the top apex is right at the tanks circumference seam - that is maximum level.
Tip: when I take my engine cover off, the forward right grommet comes off the engine cover and remains on the post. I take it off the post and press circular fit it back in it's hole. That way you feel all four point pop into place when replacing on top of engine.
|
Thanks Scott. So the engine cover just pulls straight up? Nothing to disconnect or unscrew?