Quote:
Originally Posted by jmciver
Quote:
Originally Posted by xueju1121
So, I have found this under FesSportWorldMode1.
I assume this is related to the new overboost function in N64T3M3 engine. If accurate, this will increase power output to 490 hp.
|
In which module did you find that parameter? If it is the Engine ECU, I would advise that you don't mess with it. Based on my experience with coding (using E-Sys), and what I have learned from other coders with a lot more experience than me, you don't use E-Sys to change any parameters in the Engine ECU - it could cause problems. Engine ECU parameter changes are reserved for engine tuning software tools.
If I had to speculate, in order to activate this overboost function, the help of someone experienced with tuning this engine may be necessary. |
I agreed and I haven't touched this yet.
The overboost function, according to engine manual, is only available during launch control. So I assume this is basically enabling it in daily driving.
I don't plan to do any changes to engine control unit via ESYS.