|
Just did it on my E90--a bit of pucker factor a few times, but using a taped up *small/thin* screwdriver & the Harbor Freight trim tools, I was able to get them done w/ microscopic paint 'disturbance' on the driver's side where I pried it from the back.
The stockers both 'popped' out as I worked them out--thankfully w/o broken tabs.
Many thanks to the OP & other suggestions in the thread!
__________________
* '11 E71 X6 M MCB
* '16 Z51 M7 C7 Corvette--SCCA Solo/DE Weapon
* '90 Corvette ZR-1 (Fast)
|