View Single Post
      01-02-2019, 03:08 PM   #10
lemetier
Plenipotentiary
lemetier's Avatar
2614
Rep
3,046
Posts

Drives: Yes
Join Date: Jul 2010
Location: Location

iTrader: (0)

Quote:
Originally Posted by robotk View Post
Quote:
Originally Posted by Viper7 View Post
Mine has been ordered... should arrive in early January.

Aside from that, haven't found a review from an owner anywhere.
Do you have the standard or competition?

15mm drop on this, which is conservative, but a nice compromise. Competition is set up -7mm F/-10mm R compared to stock, so I guess would go -12/-15 on this one.
It's for std F90 (Comp due later).

On the std car, the spring rates are a little different, and ride height adjustable from -0mm to -25mm.

Comp already has different kinematics, shortened springs (-7mm) with +10% stiffness, shorter aux dampeners (bump stops) and requires different spring rates than what's offered with this specific kit.

Although one could technically install this as is on a comp, it's not a good solution. During severe load reversal situations, the spring rates are inappropriate and it bottoms out on the bump stops.
Attached Images
 
Appreciate 0