02-07-2021, 03:47 PM | #2 | |
New Member
0
Rep 7
Posts |
Quote:
Edit: oops, realized your message probably relates to PSI setting and not the correlation of TPMS with its' correct corner. |
|
Appreciate
0
|
02-07-2021, 08:24 PM | #3 |
First Lieutenant
99
Rep 332
Posts |
Initially I would reverify system using idrive and not the apps.
1) I would reverify tire types installed to make sure they match what is configured in the system using iDrive. (See attached). 2) Next I verify the tire pressure to make sure the actual reading is for the tires installed. If they are the original tires then you should have recommended pressures on your driver side door sidewall. 3) If anything don't match make necessary adjustments. 4) once I reverify everything is okay, I would reset the TPMS and drive few hours. 5) Monitor correct tire pressure on iDrive with everything green 6) finally reopen BMW connect apps and read the status. |
Appreciate
1
Greg-BimmerX773.50 |
02-07-2021, 09:22 PM | #4 | |
Private
74
Rep 71
Posts |
Quote:
|
|
Appreciate
0
|
02-07-2021, 10:05 PM | #5 |
First Lieutenant
99
Rep 332
Posts |
Sure you can do that....The only reason I made the recommendation was the message says "Tire Change Recognized.." Just want to mke sure everything matches....
|
Appreciate
0
|
02-07-2021, 10:44 PM | #6 |
Private First Class
89
Rep 101
Posts |
|
Appreciate
0
|
04-27-2022, 01:54 AM | #8 |
Registered
9
Rep 3
Posts |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|