[BMW5and7]

Originally Posted by themama

There are 3 warnings that Bimmercode is going to turn off.
1. camera warning when we turn them on.
2. Night vision
3. Warning message at start up.

I think item 1 is what you are looking for. I understand you aren't interested in bimemercode. and I do not have any insight into esys yet. So sorry can't be more helpful at this point.

I think found the 3 codes on esys and I think they are the same 3 on Bimmercode too. They are LEGAL_DISCLAIMER_TIME, MACRO_CAM_LEGALDISCLAIMER and MACRO_NIVICAM_LDISCLAIMER.

I feel that non of them is for the note that appears on the camera but rather, 1. Legal camera idrive disclaimer wraning, 2. Nigh vision legal desclaimer, 3. iDrive generic disclaimer message. I have already tried these 3 codes.

Did you try to code these 3 lines in Bimmercode yourself? I checked my car, and all three code lines are changes to not active (kein_ld) but that removed the 3 warnings I referred to but no the one on the camera view itself.

[Kunjin]

My dealership updated my software fo 11.2022 and so I had to recode sport+ mode. As I was doing that, I noticed there was another option for xtraboost and enabled it, using the same method as sport plus. There is now another option in sport mode called xtraboost. in the description, is states maximum performance. After trying it, I feel like it's better than sport+, but it could just be a placebo. LOL

Anyone try this out?

[themama]

Originally Posted by Kunjin

My dealership updated my software fo 11.2022 and so I had to recode sport+ mode. As I was doing that, I noticed there was another option for xtraboost and enabled it, using the same method as sport plus. There is now another option in sport mode called xtraboost. in the description, is states maximum performance. After trying it, I feel like it's better than sport+, but it could just be a placebo. LOL

Anyone try this out?

sounds interesting.
which model is your vehicle? How did you code it?

[breese]

Originally Posted by TaytoX7

No. This has to be coded.

Mine does it on its own, never been coded

[Kunjin]

Originally Posted by themama

sounds interesting.
which model is your vehicle? How did you code it?

I have a 2019 X7 G07. I was following the previous instructions to recode everything after my software update.

Enable Sport + function & Comfort + functions
Expert mode
Body Domain Controller - BDC
3221 PfFesMaster > fes > Change FesSportWorldMode1 to SportExpert (Default should be Non sport expert).
“3221 PfFesMaster” > fes > comfort plus > Comfort Plus

Enable sport + & comfort + options in the I drive menu
Expert mode
Headunit - MGU
3008 > Fes_sport_Expert > Change nicht aktiv to aktiv for sport +
3008 > Fes_Comfort_Plus and change it to aktiv for comfort +

As I was doing this, I noticed there was an option for xtraboost, so I went in and changed it to active under the Headunit Expert Mode.

[HwyKnight]

Originally Posted by BMW5and7

So far I’ve coded the following:
1- Traffic light assist
2- Emergency lane auto response (formally the feautre has a different name I guess, but this is the one the prompts the car to open a lane and go to the very left or right when an emergency vehicle is around)
3. Ambient light color (Solid Red)
4. Auto highway-exit takeover
5. Adjusting front speed and/or distance based on route and/or condition.

I found the traffic light assist to work great in Europe but not that good in the US for whatever reasons. I shared internal slides before that traffic light assist will be further tuned and released formally in the 2023 7-series sedan, and later added to X7 around April 2022 when a new hardware is released along with highway motor assist which is currently only available on the 7-series.

Question: I was wondering if anyone has been able to code the “Stop Sign Recognition” on the X7?

How did you code in the solid Red? I tried following instructions for a G05, and now my Bronze is Blue, and my Blue is Bronze......No Red anywhere.........LOL! 2022 X7 M50i Pre-LCI

[Janjan]

I welcome anyone who has adaptive cruise control with steering assist. When I turn it on, the steering wheel does not turn green, so it does not stay in the lane. Thank you

[Janjan]

I welcome anyone who has adaptive cruise control with steering assist. When I turn it on, the steering wheel does not turn green, so it does not stay in the lane. Thank you

[Janjan]

Hello, adaptive cruise control with steering assistant. When I lock it, the steering wheel doesn't turn green, so it doesn't stay in the lane. Vie niekto nakodovat? Thank you

[Janjan]

Originally Posted by superpanjy

I tried to code auto lane change on my 2022 X7 M50i with ASSISTED DRIVE. My car has driver assistant professional package
I used bimmercode(paid version) + OBDLink CX adapter
All following 4 options were already set to aktiv (01)

CB_FZG_UMGEBUNG_FAS: aktiv (01)
CB_PRESELECT_NAVI_ANSICHT_FZG_UMGEBUNG: aktiv (01)
PIA_FZG_UMGEBUNG_FAS: aktiv (01)
SICHT_ABSICHT_ENABLE: aktiv (01)

When I active this driver assistant function, car can follow the front traffic without me touching the steer wheel. But with turn signal on, car doesn't change lane, and no green lane change arrow on instrument display either.

Please help.

Hi, I don't have these codes in my car, when I turn on the driving assistant, it doesn't keep me in the lane, my steering wheel doesn't turn green. I would need to code.
well thank you

PIA_FZABG_UMHTENGENGBLEK aktiv (01)
PIA_FZABG_UMHTENGENGANGBLE aktiv (01)

[RenatFromUSSR]

HEADUNIT: 3001 WLAN_5GHZ_CHANNEL -> nicht_aktiv
And no more disconnection issues for Apple Carplay. WiFi will still work but on 2.4 GHz.

Tailgate Function Module — Expert mode — 3011 APPL_PLG_SPEED_PROFILE:

ProfileCloseStopNode1PosPlg
Byte 0: 00
Byte 1: C8

ProfileCloseStopNode1PwmPlg
Byte 0: 00
Byte 1: C8

ProfileCloseStopNode2PosPlg
Byte 0: 01
Byte 1: C8

ProfileCloseStopNode2PwmPlg
Byte 0: 01
Byte 1: C8

Result:
https://www.youtube.com/shorts/1YrfC5DCvQI
It was 2nd version.

The first one is a lit bit slower closure.

The 1st version:

ProfileCloseStopNode1PosPlg
ProfileCloseStopNode1PwmPlg
ProfileCloseStopNode2PosPlg
ProfileCloseStopNode2PwmPlg

changed to:
Byte 0: 00
Byte 1: A0

https://youtu.be/KUl5St1nkjo

[fizad99]

Originally Posted by Kruppa

Has anybody tried to figure out if you can code the air suspension? The adjustment in the car won't allow you to access the lowest setting unless you're parked. There must be a way to allow that ride height while driving. That would be easier than adjustable lowering links which I also can't seem to find.

Did you figure this out? Can you share the coding?

[Kuba]

Originally Posted by BMW5and7

So far I’ve coded the following:
1- Traffic light assist
2- Emergency lane auto response (formally the feautre has a different name I guess, but this is the one the prompts the car to open a lane and go to the very left or right when an emergency vehicle is around)
3. Ambient light color (Solid Red)
4. Auto highway-exit takeover
5. Adjusting front speed and/or distance based on route and/or condition.

I found the traffic light assist to work great in Europe but not that good in the US for whatever reasons. I shared internal slides before that traffic light assist will be further tuned and released formally in the 2023 7-series sedan, and later added to X7 around April 2022 when a new hardware is released along with highway motor assist which is currently only available on the 7-series.

Question: I was wondering if anyone has been able to code the “Stop Sign Recognition” on the X7?

Hi, may I ask how you coded Traffic Light Assist? I have it in my car, it can be activated in idrive. Unfortunately, it says that there is a restriction for my country. Can this restriction be removed? Thank you

[TheNine90]

change in DSC and SAS to FF, FF, FF, FF
C_SLA_UCC_Land_aktiv
C_SLA_aUCC_Land_aktiv
C_SLA_aSLA_Land_aktiv