[CODING] G07 E-Sys Cheat Codes

HEBREWHAMMER0913 · 12-18-2020, 02:00 PM

Quote:

Originally Posted by M6BMWDriver

Is there a way to code the Ground Clearance / self-Leveling to show in the iDrive

Also where can i see the cose for ground clearance in the HU on esys

I’m trying to figure out a way where i can lower the car via key fob or even lower it when i get out of the car automatically

did you every figure this out ? I want to do this on my x5

jasheaer · 12-21-2020, 01:29 PM

Putting 30" winter tires on my X7 compared to the 31" stock tires. There are options in the idrive menu for various winter set up sizes, but all are 31"... is there a way to code a 30" tire instead?

Sorry if this is a dumb question, I've tuned my diesel trucks and changed the tire height in the ECU for upgraded larger diameters, but have never tried to mess with any of my BMWs before.

Jay

Silver.Solid · 12-22-2020, 01:45 PM

Quote:

Originally Posted by jasheaer

Putting 30" winter tires on my X7 compared to the 31" stock tires. There are options in the idrive menu for various winter set up sizes, but all are 31"... is there a way to code a 30" tire instead?

Sorry if this is a dumb question, I've tuned my diesel trucks and changed the tire height in the ECU for upgraded larger diameters, but have never tried to mess with any of my BMWs before.

Jay

really hoping you mean 21 and 20inch wheels.

jasheaer · 12-23-2020, 01:12 PM

Quote:

Originally Posted by Silver.Solid

really hoping you mean 21 and 20inch wheels.

I was quoting the overall height of the tire... which is what matters for determining ground speed

Silver.Solid · 12-24-2020, 09:11 AM

Quote:

Originally Posted by jasheaer

I was quoting the overall height of the tire... which is what matters for determining ground speed

ahh... makes sense.

Idrive only uses the tire size to calculate needed PSI. As long as you maintain the tire diameter you'll be okay as long as the 20's clear the front brakes.

Xmel` · 01-27-2021, 03:58 PM

Does anyone have the mirror angle change and the legal disclaimer off
working on G05/07?
And if so how did you code it?
I tried to make it work many times but no luck ((
Thanks

Almaretto · 01-27-2021, 06:04 PM

Quote:

Originally Posted by Xmel`

Does anyone have the mirror angle change and the legal disclaimer off
working on G05/07?
And if so how did you code it?
I tried to make it work many times but no luck ((
Thanks

Both work.

Mirror angle - BDC
Legal Disclaimer - MGU

Xmel` · 01-31-2021, 12:37 PM

Quote:

Originally Posted by Almaretto

Quote:

Originally Posted by Xmel`

Does anyone have the mirror angle change and the legal disclaimer off
working on G05/07?
And if so how did you code it?
I tried to make it work many times but no luck ((
Thanks

Both work.

Mirror angle - BDC
Legal Disclaimer - MGU

Should it be coded in diagnostic mode or something?
When I change the parameters the disclaimer stays always ON not even default 3-5 sec.
And the mirror angle stays the same on whatever settings.
G05 2019 11/2020.xx

Almaretto · 02-03-2021, 08:59 PM

Quote:

Originally Posted by Xmel`

Should it be coded in diagnostic mode or something?
When I change the parameters the disclaimer stays always ON not even default 3-5 sec.
And the mirror angle stays the same on whatever settings.
G05 2019 11/2020.xx

I always code with engine running (unless applying change to engine ECU).

Failure to observe change could be user error or mapping issue. I just coded both on three different cars and it worked.

exokiss · 02-05-2021, 12:15 PM

I am very busy at work and have no personal time at all lately. I wonder if there's a guru in Brooklyn who I can rely on adding all the tweaks we're all talk about here?

Resjudicata · 02-05-2021, 01:03 PM

Quote:

Originally Posted by exokiss

I am very busy at work and have no personal time at all lately. I wonder if there's a guru in Brooklyn who I can rely on adding all the tweaks we're all talk about here?

Talk to r33_RGSport

Almaretto · 02-05-2021, 01:55 PM

Quote:

Originally Posted by exokiss

I am very busy at work and have no personal time at all lately. I wonder if there's a guru in Brooklyn who I can rely on adding all the tweaks we're all talk about here?

There are a number of individuals (including I) that can do it remotely and a few that are local to Northeast.

ifr · 02-05-2021, 02:48 PM

Quote:

Originally Posted by Almaretto

Quote:

Originally Posted by Xmel`

Should it be coded in diagnostic mode or something?
When I change the parameters the disclaimer stays always ON not even default 3-5 sec.
And the mirror angle stays the same on whatever settings.
G05 2019 11/2020.xx

I always code with engine running (unless applying change to engine ECU).

Failure to observe change could be user error or mapping issue. I just coded both on three different cars and it worked.

Exception is cars (S18A?) with DSC VIP2 (istep 11/2019 and later). Can only be coded in diag mode. Same for EPS ECU

Almaretto · 02-06-2021, 01:11 PM

Quote:

Originally Posted by ifr

Exception is cars (S18A?) with DSC VIP2 (istep 11/2019 and later). Can only be coded in diag mode. Same for EPS ECU

I have not had issue with latest production months.

ifr · 02-06-2021, 01:37 PM

Quote:

Originally Posted by Almaretto

Quote:

Originally Posted by ifr

Exception is cars (S18A?) with DSC VIP2 (istep 11/2019 and later). Can only be coded in diag mode. Same for EPS ECU

I have not had issue with latest production months.

What model do you have?

I've seen it on G05/G07 and multiple reports on this board. Throws up a wdbi_plain error and cannot fdl or vo code.

Couldn't code those 2 ECU at all until I saw istep upgrade was coding both ECU without issue in diag mode and put 2+2 together.

Started after 19-11 istep update which coincidentally had an activation code campaign on VIP.

gnommon · 02-13-2021, 11:31 AM

Do you reset you codings before you bring it to the bmw dealer? Do they take issue with obvious codings like alpina instrument cluster?

Almaretto · 02-24-2021, 03:07 AM

Quote:

Originally Posted by ifr

What model do you have?

I've seen it on G05/G07 and multiple reports on this board. Throws up a wdbi_plain error and cannot fdl or vo code.

Couldn't code those 2 ECU at all until I saw istep upgrade was coding both ECU without issue in diag mode and put 2+2 together.

Started after 19-11 istep update which coincidentally had an activation code campaign on VIP.

G05/G07/G20/ETC. I will watch out for error and report back if I run into it.

exokiss · 03-01-2021, 07:42 PM

Quote:

Originally Posted by gnommon

Do you reset you codings before you bring it to the bmw dealer? Do they take issue with obvious codings like alpina instrument cluster?

I'm curious to hear that too

jsmonet · 03-02-2021, 12:59 AM

if I feel like it, and I'm going in for something broken, I'll reset the obvious stuff and pull off my racechip.

last time, when my comfort access controller crapped out entirely, I pulled the racechip and left everything as-is (alpina dash colors, yada yada) and it came back to me with everything reset since installing CA module requires a fresh pave of all systems.

Amount of crap I got from the dealership: less than zero. Hell, they even mentioned they liked my wheels. The upshot is nobody cares about stuff you can mess with using Bimmercode. It doesn't hurt anything.

jmciver · 03-02-2021, 10:09 AM

Quote:

Originally Posted by exokiss

Quote:

Originally Posted by gnommon

Do you reset you codings before you bring it to the bmw dealer? Do they take issue with obvious codings like alpina instrument cluster?

I'm curious to hear that too

I don't and never had an issue in the past with any of my BMWs, to include my X7 now. That includes two recent occasions when I had the dealer update my software to address a bug with my X7.

Xmel` · 03-06-2021, 05:29 PM

Quote:

Originally Posted by ifr

Quote:

Originally Posted by Almaretto

Quote:

Originally Posted by Xmel`

Should it be coded in diagnostic mode or something?
When I change the parameters the disclaimer stays always ON not even default 3-5 sec.
And the mirror angle stays the same on whatever settings.
G05 2019 11/2020.xx

I always code with engine running (unless applying change to engine ECU).

Failure to observe change could be user error or mapping issue. I just coded both on three different cars and it worked.

Exception is cars (S18A?) with DSC VIP2 (istep 11/2019 and later). Can only be coded in diag mode. Same for EPS ECU

I tried every mode but still can not code that mirror angle and camera disclaimer. It works on F34 and others.
But can't make it work on G05!
Any ideas...

Xmel` · 03-06-2021, 05:35 PM

And one more thing.
Is it possible to code an Alpina gearbox on our G05/07?
What do you think?

12-21-2020, 01:29 PM	#244
jasheaer Private First Class 73 Rep 110 Posts Drives: '21 X7 M50i Join Date: Jan 2012 Location: Bettendorf, IA iTrader: (0)	Putting 30" winter tires on my X7 compared to the 31" stock tires. There are options in the idrive menu for various winter set up sizes, but all are 31"... is there a way to code a 30" tire instead? Sorry if this is a dumb question, I've tuned my diesel trucks and changed the tire height in the ECU for upgraded larger diameters, but have never tried to mess with any of my BMWs before. Jay __________________ Elsie - '21 X7 M50i Snappah - '15 X5 35d (retired) Herbert - '12 X5 35d (retired)
	Appreciate 0 Quote

01-27-2021, 03:58 PM	#248
Xmel` Private 7 Rep 66 Posts Drives: BMW X5 G05 Join Date: Aug 2019 Location: EU iTrader: (0)	Does anyone have the mirror angle change and the legal disclaimer off working on G05/07? And if so how did you code it? I tried to make it work many times but no luck (( Thanks
	Appreciate 0 Quote

02-05-2021, 12:15 PM	#252
exokiss Private First Class 66 Rep 134 Posts Drives: 2020 BMW X7 Join Date: Mar 2020 Location: New York iTrader: (0) Garage List 2020 BMW X7 [0.00]	I am very busy at work and have no personal time at all lately. I wonder if there's a guru in Brooklyn who I can rely on adding all the tweaks we're all talk about here?
	Appreciate 1 Resjudicata1603.00 Quote

02-13-2021, 11:31 AM	#258
gnommon Enlisted Member 19 Rep 37 Posts Drives: BMW X7 Join Date: Jun 2020 Location: Palo Alto, CA iTrader: (0)	Do you reset you codings before you bring it to the bmw dealer? Do they take issue with obvious codings like alpina instrument cluster?
	Appreciate 1 Heimdall136.50 Quote

03-02-2021, 12:59 AM	#261
jsmonet Captain 302 Rep 913 Posts Drives: 2020 x7 m50i Join Date: Nov 2011 Location: so cal iTrader: (2)	if I feel like it, and I'm going in for something broken, I'll reset the obvious stuff and pull off my racechip. last time, when my comfort access controller crapped out entirely, I pulled the racechip and left everything as-is (alpina dash colors, yada yada) and it came back to me with everything reset since installing CA module requires a fresh pave of all systems. Amount of crap I got from the dealership: less than zero. Hell, they even mentioned they liked my wheels. The upshot is nobody cares about stuff you can mess with using Bimmercode. It doesn't hurt anything. __________________ 2020 bmw xHippo, v8tt edition
	Appreciate 0 Quote

03-06-2021, 05:35 PM	#264
Xmel` Private 7 Rep 66 Posts Drives: BMW X5 G05 Join Date: Aug 2019 Location: EU iTrader: (0)	And one more thing. Is it possible to code an Alpina gearbox on our G05/07? What do you think?
	Appreciate 0 Quote