Shiv posted the new firmware and map on his site

cn555ic · 12-19-2007, 09:55 PM

Just posted about 1 hour ago...New firmware and new map to eliminate the limp mode!! Repeat firmware must be uploaded for this map and future maps!!

O-cha · 12-19-2007, 09:56 PM

New firmware? Hmm. What limp mode was going on I have been skiing for a week?

Ruff Rider · 12-19-2007, 09:57 PM

cn555ic · 12-19-2007, 10:05 PM

Quote:

Originally Posted by O-cha

New firmware? Hmm. What limp mode was going on I have been skiing for a week?

People going from 3rd gear pulls to 4th gear redline

ontopofm · 12-19-2007, 10:21 PM

is this map only for those that got limp or for any v2 user???

jfewins · 12-19-2007, 10:25 PM

Quote:

Originally Posted by ontopofm

is this map only for those that got limp or for any v2 user???

Any v2 user. However, I'm not going to update until I have cause to open the hood again (i.e. get my drop in filters, or v2.0.3 arrives).

cn555ic · 12-19-2007, 10:28 PM

I think Shiv said something about this new map also giving some torque back at the low end, but that what i thought i read....Any which way, this new firmware must be loaded in the future for the V2.03 map that coming out soon!!....I already loaded it and i will see tommorrow if there is any difference!!!.

sdwilly · 12-19-2007, 10:30 PM

Quote:

Originally Posted by cn555ic

I think Shiv said something about this new map also giving some torque back at the low end, but that what i thought i read....Any which way, this new firmware must be loaded in the future for the V2.03 map that coming out soon!!....I already loaded it and i will see tommorrow if there is any difference!!!.

Let us know how it is, just downloaded it but I'm too lazy to run out and update tonight, maybe tomorrow.

Driver72 · 12-19-2007, 10:34 PM

Sweet!

Yeah, this updated v2.0.2 map has "slightly" more hp up top and "slightly" more torque down low as well.

Shiv, is this map for the 6AT users too?
And does it fix the large power drop off in the last 200-300 rpms that
v2.0.2 12-11-07 has?

Thanks!

Driver72 · 12-19-2007, 10:34 PM

Anybody got a link to where it is on the Vishnu site?

Thanks

sdwilly · 12-19-2007, 10:39 PM

Quote:

Originally Posted by Driver72

Anybody got a link to where it is on the Vishnu site?

Thanks

http://www.vishnutuningforum.com/for...read.php?t=322

It's in the first post, same map AT & MT (Don't forget to get the Firmware update as well).

Driver72 · 12-19-2007, 10:45 PM

Quote:

Originally Posted by sdwilly

http://www.vishnutuningforum.com/for...read.php?t=322

It's in the first post, same map AT & MT (Don't forget to get the Firmware update as well).

Thanks!

OK, what's going on though?

I logged in but when I click on the updated firmware for download it's asking me to log in again and saying, "you do not have permission to access this page, or you are not blah blah blah"
But I can download the new updated map???

O-cha · 12-19-2007, 10:54 PM

I wonder when this air intake that's "in development" will come out.

OpenFlash · 12-19-2007, 11:07 PM

Hi guys,
I tried to make an announcement on this forum earlier but the site was temporarily closed for maintenance

Anyway, the new maps and firmware should be a step in the right direction. I haven't heard back from all of our limp-prone (I mean that with the most possible respect

) testers due to weather conditions preventing most folks from doing any solid runs. Most of them who have managed to do some testing, have reported back that the 3rd to 4th gear limp mode is gone. However, here are a couple stragglers who still have it and i've the necessary datalog info. Again, the weather slowing things down. But safety comes first!!!

Anyway, if anyone still throws a limp mode during that 3rd to 4th gear shift, all they need to do is email me at shiv@vishnutuning.com. I'll email back with a request asking for a datalog Once provided, I'll crunch the data and send back a custom map that will solve the issue. I don't expect this to be a common scenario since only a small percentage of people threw the limp in the first place. But we are aiming for a 0% limp rate and will work with customers on a case-by-case basis until every case is solved.

Best Regards,
Shiv

stillclaimndp · 12-19-2007, 11:10 PM

so this is for 6mt too? someone said difference in power too?

Driver72 · 12-19-2007, 11:12 PM

Shiv do I have to be "online" with the PROcede v2 reader and datalog program to download the updated firmware?

I tried to download the updated firmware to my desktop but it would not let me.
BTW too, once I am able to download the new firmware, and am "online" with the serial cable connected, car ignition on (but engine off) do I just click on "update firmware" from the pulldown menu and then select the updated firmware that I downloaded?

After that is complete, then I can uploade the new map you just posted correct?

Thanks

Kbueno · 12-19-2007, 11:18 PM

Quote:

Originally Posted by Driver72

Shiv do I have to be "online" with the PROcede v2 reader and datalog program to download the updated firmware?

I tried to download the updated firmware to my desktop but it would not let me.
BTW too, once I am able to download the new firmware, and am "online" with the serial cable connected, car ignition on (but engine off) do I just click on "update firmware" from the pulldown menu and then select the updated firmware that I downloaded?

After that is complete, then I can uploade the new map you just posted correct?

Thanks

Download from the Vishnu site? You need to be a registered user to download...is that the problem?

tek818 · 12-19-2007, 11:20 PM

shiv: will we be able to run prior v2 maps on this firmware?

Kbueno · 12-19-2007, 11:20 PM

Yah, once you download and have it unzipped, select update firmware and select the "..." box to point to the location you unzipped it to. Then start update.

OpenFlash · 12-19-2007, 11:25 PM

Quote:

Originally Posted by AB Tek 818

shiv: will we be able to run prior v2 maps on this firmware?

Yep. No problem. All the new firmware does is activate a new feature that was used to be disabled. Older maps don't ask for that feature so it's all good.

Shiv

badass335 · 12-19-2007, 11:32 PM

Quote:

Originally Posted by shiv@vishnu

Hi guys,
I tried to make an announcement on this forum earlier but the site was temporarily closed for maintenance

Anyway, the new maps and firmware should be a step in the right direction. I haven't heard back from all of our limp-prone (I mean that with the most possible respect

) testers due to weather conditions preventing most folks from doing any solid runs. Most of them who have managed to do some testing, have reported back that the 3rd to 4th gear limp mode is gone. However, here are a couple stragglers who still have it and i've the necessary datalog info. Again, the weather slowing things down. But safety comes first!!!

Anyway, if anyone still throws a limp mode during that 3rd to 4th gear shift, all they need to do is email me at shiv@vishnutuning.com. I'll email back with a request asking for a datalog Once provided, I'll crunch the data and send back a custom map that will solve the issue. I don't expect this to be a common scenario since only a small percentage of people threw the limp in the first place. But we are aiming for a 0% limp rate and will work with customers on a case-by-case basis until every case is solved.

Best Regards,
Shiv

Hey Shiv,

Weather wasn't the best but was able to do a couple of runs in and no limp mode

Before i was ALWAYS able to reproduce but not any more. Do you want logs still? If o, i'll try to do a few runs late tonight! Shoot me a pm or email and i'll do a few data runs.

stillclaimndp · 12-19-2007, 11:33 PM

Quote:

Originally Posted by shiv@vishnu

Yep. No problem. All the new firmware does is activate a new feature that was used to be disabled. Older maps don't ask for that feature so it's all good.

Shiv

i know of all people you don't expect me to be asking this but it's been a while since ive done this... once downloaded what do i do with the firmware file?

12-19-2007, 09:55 PM	#1
cn555ic 442 Rep 18,331 Posts Drives: 335i Join Date: Jun 2007 Location: US iTrader: (6)	Shiv posted the new firmware and map on his site Just posted about 1 hour ago...New firmware and new map to eliminate the limp mode!! Repeat firmware must be uploaded for this map and future maps!!
	Appreciate 0 Tweet Quote

12-19-2007, 09:56 PM	#2
O-cha Brigadier General 218 Rep 4,726 Posts Drives: Mcoupe Join Date: Oct 2007 Location: In front of you iTrader: (2)	New firmware? Hmm. What limp mode was going on I have been skiing for a week? __________________
	Appreciate 0 Quote

12-19-2007, 09:57 PM	#3
Ruff Rider "posting from my recliner" 102 Rep 7,241 Posts Drives: twin turbo Prius Join Date: Feb 2007 Location: Where the air is thin iTrader: (0)	__________________ Ping Golf Club demo tech
	Appreciate 0 Quote

12-19-2007, 10:21 PM	#5
ontopofm Lieutenant Colonel 76 Rep 1,548 Posts Drives: stock Join Date: Jun 2007 Location: CA iTrader: (4)	is this map only for those that got limp or for any v2 user???
	Appreciate 0 Quote

12-19-2007, 10:28 PM	#7
cn555ic 442 Rep 18,331 Posts Drives: 335i Join Date: Jun 2007 Location: US iTrader: (6)	I think Shiv said something about this new map also giving some torque back at the low end, but that what i thought i read....Any which way, this new firmware must be loaded in the future for the V2.03 map that coming out soon!!....I already loaded it and i will see tommorrow if there is any difference!!!.
	Appreciate 0 Quote

12-19-2007, 10:34 PM	#9
Driver72 Brigadier General 330 Rep 4,484 Posts Drives: 335i - to new owners now. Join Date: Dec 2006 Location: California iTrader: (0)	Sweet! Yeah, this updated v2.0.2 map has "slightly" more hp up top and "slightly" more torque down low as well. Shiv, is this map for the 6AT users too? And does it fix the large power drop off in the last 200-300 rpms that v2.0.2 12-11-07 has? Thanks!
	Appreciate 0 Quote

12-19-2007, 10:54 PM	#13
O-cha Brigadier General 218 Rep 4,726 Posts Drives: Mcoupe Join Date: Oct 2007 Location: In front of you iTrader: (2)	I wonder when this air intake that's "in development" will come out. __________________
	Appreciate 0 Quote

12-19-2007, 11:07 PM	#14
OpenFlash 1748 Rep 17,960 Posts Drives: A Lot Join Date: Sep 2006 Location: SF Bay, CA iTrader: (0) Garage List 2018 Ducati Panigal ... [0.00] 2016 Mazda CX5 [0.00] 2017 Aprilia Tuono ... [0.00] 2019 BMW M2 Competi ... [0.00] 2015 BMW M5 Competi ... [10.00] 2016 Ducati XDiavel S [0.00] 2016 AMG GT S [0.00] 2011 Ferrari 458 It ... [0.00] 2017 Charger Hellcat [0.00] 2015 KTM Super Duke ... [0.00] 2016 KTM RC390 [0.00]	Hi guys, I tried to make an announcement on this forum earlier but the site was temporarily closed for maintenance Anyway, the new maps and firmware should be a step in the right direction. I haven't heard back from all of our limp-prone (I mean that with the most possible respect ) testers due to weather conditions preventing most folks from doing any solid runs. Most of them who have managed to do some testing, have reported back that the 3rd to 4th gear limp mode is gone. However, here are a couple stragglers who still have it and i've the necessary datalog info. Again, the weather slowing things down. But safety comes first!!! Anyway, if anyone still throws a limp mode during that 3rd to 4th gear shift, all they need to do is email me at shiv@vishnutuning.com. I'll email back with a request asking for a datalog Once provided, I'll crunch the data and send back a custom map that will solve the issue. I don't expect this to be a common scenario since only a small percentage of people threw the limp in the first place. But we are aiming for a 0% limp rate and will work with customers on a case-by-case basis until every case is solved. Best Regards, Shiv
	Appreciate 0 Quote

12-19-2007, 11:10 PM	#15
stillclaimndp Dancing Machine 47 Rep 1,419 Posts Drives: 335i e90 ZSP Join Date: Aug 2007 Location: Walnut Creek, Ca iTrader: (0)	so this is for 6mt too? someone said difference in power too? __________________ 2007 e90 & 1981 Corvette Predecessors: 2007 BMW 335i E92, 2006 M5, 2008 Viper SRT10 Coupe, 2005 Viper Yellow, 2006 Corvette Z51, 2009 Challenger SRT8, 2006 S4, 2001.5 Nogaro Blue S4, 2006 GTI w/ DSG, 06 Evo IX, 04 S4, 04 911x51, 03 Evo VIII, 98 Eclipse GSX, 96 GST, 92 Galant Vr-4, '70 Grand Prix Model J, '70 Nova, '68 Firebird
	Appreciate 0 Quote

12-19-2007, 11:12 PM	#16
Driver72 Brigadier General 330 Rep 4,484 Posts Drives: 335i - to new owners now. Join Date: Dec 2006 Location: California iTrader: (0)	Shiv do I have to be "online" with the PROcede v2 reader and datalog program to download the updated firmware? I tried to download the updated firmware to my desktop but it would not let me. BTW too, once I am able to download the new firmware, and am "online" with the serial cable connected, car ignition on (but engine off) do I just click on "update firmware" from the pulldown menu and then select the updated firmware that I downloaded? After that is complete, then I can uploade the new map you just posted correct? Thanks
	Appreciate 0 Quote

12-19-2007, 11:20 PM	#18
tek818 Lieutenant Colonel 137 Rep 1,954 Posts Drives: 2020 X3M Competition Join Date: Mar 2007 Location: Los Angeles, CA iTrader: (2) Garage List 2018 M3 ZCP [9.50]	shiv: will we be able to run prior v2 maps on this firmware?
	Appreciate 0 Quote

12-19-2007, 11:20 PM	#19
Kbueno Lieutenant Colonel 100 Rep 1,712 Posts Drives: F82 Join Date: Jan 2007 Location: California iTrader: (5)	Yah, once you download and have it unzipped, select update firmware and select the "..." box to point to the location you unzipped it to. Then start update.
	Appreciate 0 Quote