[nick46]

Does anyone know if the blue brembos that come on the Fx chassis cars are used by other manufacturers as oem equipment?
As I'm contemplating swapping to these brakes I thought to widen my search, and to perhaps find a bargain, there maybe other car manufacturers that used exactly the same calipers.
Anyone know the brembo part numbers for the 340mm & 370mm front calipers and the 345mm rear calipers?

[dragerboy]

They are not used by any other manufacturer. Use RealOEM with a 435d or similar and you'll find part numbers.

[nick46]

That would just give me the bmw part number. I was after the brembo number to then search for the calipers to see if any other manufacturers used them. The ones subaru use look virtually identical. I guess the difference between manufacturers is the mounting points. Brembo must manufacturer each caliper with the relevant mounting points for each manufacturer.

[Daviebrown]

you can buy adaptor brackets on ebay to fit various brembo calipers to various cars, popular are 4 pot calipers from porsche 996's both front and rear, but even then they're not cheap second hand.