[tripower]

2021 X7 40i, I got the 755m wheel package and was wondering if anyone could confirm if there would be any clearance issues if I were to purchased another set of rear wheels and tires for the front.

[BMWBear]

Originally Posted by tripower

2021 X7 40i, I got the 755m wheel package and was wondering if anyone could confirm if there would be any clearance issues if I were to purchased another set of rear wheels and tires for the front.

If you want to run 315s up front yes you’ll have clearance issues.
I’m running an aftermarket wheel and tire combo and was able to go up to 285/40/22 because my wheels have an aggressive offset compared stock. I don’t think you can squeeze in anything bigger. Plus you need to insure you’re within a certain diameter front to back.
I also have a larger tire out back 325/35/22.

[tripower]

Originally Posted by BYEIL

If you want to run 315s up front yes you’ll have clearance issues.
I’m running an aftermarket wheel and tire combo and was able to go up to 285/40/22 because my wheels have an aggressive offset compared stock. I don’t think you can squeeze in anything bigger. Plus you need to insure you’re within a certain diameter front to back.
I also have a larger tire out back 325/35/22.

Thanks for the heads up, I really wasn't too confident I would get an answer on this, especially that quick. I bet those 325's look good. Its amazing to me how much wider the ones I have seen look compared to the 315's. The spec. only shows .4" but visually seems like much more.
Maybe the ones I saw were on the wide end of the wheel width range and made them look wider.
Thanks again for the reply.

[Auricom]

When a G05 forum member accidentally mounts OEM 315 10.5 rear wheels up front and takes a short drive. Ja you'll definitely have clearance issues - wheel will scrap the upper control arm and grind the inside lip.

I wouldn't exceed 285 for fronts as BYEIL suggested.