 |
|
 |
|
|
|
|
|
|||||||||
 |
|
|
Thread Tools | Search this Thread |
| 11-11-2009, 04:33 PM | #1 |
|
Major General
 
916
Rep 6,094
Posts |
PYSpeed.com | Got Clear Bra? Top Notch Clear Bra Products from Premier at PYSpeed
Need to Take Care your Clear Bra?
PYSpeed is proud to exclusively working with Premier Mobile Group - Protective Films International to bring their cleaning products here. PF1 PRODUCTS: "UNCOMPROMISING AESTHETICS AND PROTECTION" Traditionally, plastic cleaners were the main source for cleaning paint protection film. However, these products were never designed specifically for clear bras. Chemicals within plastic cleaners can actually be harmful to the film if left on for an extended period of time. Certain propellants within aerosol canisters are responsible for excessively drying out the pores of the clear bra, which then leaves them open to the elements and yellowing. PF1 Film Cleanse - a non-aerosol product that is designed specifically for the acrylic clear coat of today’s paint protection film. The clear coat on clear bras are very different from the clear coat on cars’ paint today, which is why Premier in early 2008 set out to develop a product that can properly clean paint protection film. The product will not dry out the pores of the film and does not carry any type of polish that can abrade the film. Film Cleanse is a deep cleaner with acrylic resins designed to lift the dirt off the film before cleaning / wiping. The product not only deep cleans, but it also does not strip the film of protective sealants and waxes. PF1 Crystalline - "The First Nano Bonding Sealant designed for your clear Bra" “Protect, enhance, and lengthen the life of your clear bra with PF1 Crystalline” PF1 TTR is an advanced agent that is created for the surface of your clear bra. It attacks the marks and transfers at the micro-level to loosen up these particles so that it may be safely wiped off with a clean microfiber towel. Most importantly, PF1 TTR can be utilized on paint protection film with a clearcoat or topcoat safely. Simply clean the area in which PF1 TTR will be applied. Next spray on and allow for TTR to start working right away. In five seconds, begin wiping with a clean microfiber towel. Repeat these steps as needed. |
|
|
|
| Bookmarks |
|
|
