Value/crank Cover Gasket

Banners24b · 06-26-2014, 06:00 AM

Have started to get the odd drip of oil from what appears to be where the valve/crank cover is bolted to the bottom end. perhaps one drip of oil per min when the car is hot resulting in whisps of white oily smelling smoke.

Been reading up on the DIY of replacing the gasket, but not seen anyone post where they actually bought one from

Can anyone reccomend a good place to get one from ??

Phil

phil200tdi · 06-26-2014, 06:10 AM

BMW Dealer

BMMiniParts website no longer works for me.. But that would be the best place..

I think Rob Beck did a guide which mentioned using sealant in other areas (Spark Plug tubes etc).

06-26-2014, 06:00 AM	#1
Banners24b Second Lieutenant 13 Rep 244 Posts Drives: 335i SE Join Date: Aug 2013 Location: United Kingdom iTrader: (0)	Value/crank Cover Gasket Have started to get the odd drip of oil from what appears to be where the valve/crank cover is bolted to the bottom end. perhaps one drip of oil per min when the car is hot resulting in whisps of white oily smelling smoke. Been reading up on the DIY of replacing the gasket, but not seen anyone post where they actually bought one from Can anyone reccomend a good place to get one from ?? Phil
	Appreciate 0 Tweet Quote

06-26-2014, 06:10 AM	#2
phil200tdi Colonel 112 Rep 2,621 Posts Drives: 335i M Sport E90 LCI manual Join Date: Jan 2011 Location: Aylesbury iTrader: (1)	BMW Dealer BMMiniParts website no longer works for me.. But that would be the best place.. I think Rob Beck did a guide which mentioned using sealant in other areas (Spark Plug tubes etc). __________________ Car: e91 330d with Viezu map Gone but not forgotten: 2010 Jaguar XFR (Cat-back exhaust, pulley, intake mods and map), Highly Modified E90 335i LCI M Sport Manual (circa 480BHP/500lb ft)
	Appreciate 0 Quote