VRSF Race/Street 335i Exhaust

F80M · 06-29-2014, 04:02 PM

Heard there will be a revised 335i VRSF street exhaust releasing soon along with their race version. Is there any update on this?

Thanks,
J-

Torgus · 06-29-2014, 05:23 PM

Why don't you contact the manufacturer directly or at the very least tag Tiago in your post? Do you expect him to read every thread on this forum?

BTW if it was available I am sure he would make a thread...I'll probably pick the revised version up once it is out. I'd grab the cobb but 3'' is lame.

F80M · 06-29-2014, 06:07 PM

Quote:

Originally Posted by Torgus

Why don't you contact the manufacturer directly or at the very least tag Tiago in your post? Do you expect him to read every thread on this forum?

BTW if it was available I am sure he would make a thread...I'll probably pick the revised version up once it is out. I'd grab the cobb but 3'' is lame.

Relax mofo... It's just a question thread...lol

Torgus · 06-29-2014, 06:22 PM

Quote:

Originally Posted by -StanceCity-

Relax mofo... It's just a question thread...lol

lol.

Out of curiosity since when do stance kids care about performance? Or is it just a sound/looks thing? Even with the redesign I believe it will hang lower than stock, if you are going to stance your car this isn't the exhaust for you.

pwr hungry · 06-29-2014, 07:22 PM

Quote:

Originally Posted by -StanceCity-

Relax mofo... It's just a question thread...lol

You relax mofo...he's just stating what ever person that has been on this forum and read the rules would say. Use logic.

Step 1. Use the advanced search function.
Step 2. Contact the vendor directly.
Step 3. Don't ask a question about a vendor's product unless the above two don't answer it.

F80M · 06-29-2014, 07:47 PM

Quote:

Originally Posted by Torgus

lol.

Out of curiosity since when do stance kids care about performance? Or is it just a sound/looks thing? Even with the redesign I believe it will hang lower than stock, if you are going to stance your car this isn't the exhaust for you.

ahh... this mofo again...

F80M · 06-29-2014, 07:49 PM

Quote:

Originally Posted by pwr hungry

You relax mofo...he's just stating what ever person that has been on this forum and read the rules would say. Use logic.

Step 1. Use the advanced search function.
Step 2. Contact the vendor directly.
Step 3. Don't ask a question about a vendor's product unless the above two don't answer it.

You should relax too mofo...

But thanks for your time and response mofo...

DuDai · 06-29-2014, 07:49 PM

Quote:

Originally Posted by -StanceCity-

ahh... this mofo again...

What's a mofo?

Ingeniator · 06-29-2014, 07:51 PM

In before lock.

Seriously though you couldn't perhaps check the other thread asking the same question from 2 months ago. Still in development. It is a revised mid pipe and will likely be given free to gen1 owners. Also @tiago@VRSF

pwr hungry · 06-29-2014, 08:20 PM

He's into stance...he clearly doesn't understand how the engine forum works. Try the wheels or photos/videos section "brah"!

Torgus · 06-29-2014, 08:24 PM

Quote:

Originally Posted by -StanceCity-

ahh... this mofo again...

You and your thread is a joke. Go stance your car bro. Hard park that shit. lol.

Who the hell calls people mofos these days anyways?

Quote:

Originally Posted by Ingeniator

Also @tiago@VRSF

Don't help him man

Quote:

Originally Posted by pwr hungry

He's into stance...he clearly doesn't understand how the engine forum works. Try the wheels or photos/videos section "brah"!

This.

Again I am sure Tiago will make a thread once the updated exhaust is available. No one more than him wants it to be available so he can make money off of it.

edit: In before more 'you are all mofos' posts lol

Tiago@VRSF · 06-30-2014, 05:03 AM

We're still working on it, no exact ETA yet, should be 1-2 months.

F80M · 06-30-2014, 12:41 PM

Quote:

Originally Posted by Torgus

You and your thread is a joke. Go stance your car bro. Hard park that shit. lol.

Who the hell calls people mofos these days anyways?

Don't help him man

This.

Again I am sure Tiago will make a thread once the updated exhaust is available. No one more than him wants it to be available so he can make money off of it.

edit: In before more 'you are all mofos' posts lol

Wow...you are a really piece of shit...lol. mad? lol

Quote:

Originally Posted by Tiago@VRSF

We're still working on it, no exact ETA yet, should be 1-2 months.

Thanks much Tiago!

pwr hungry · 06-30-2014, 01:26 PM

Quote:

Originally Posted by -StanceCity-

Wow...you are a really piece of shit...lol. mad? lol

Thanks much Tiago!

Reported for violation of site rules. Have a nice day.

Torgus · 06-30-2014, 01:38 PM

These stance kids are fun.

3000GT MR · 06-30-2014, 02:02 PM

Tiago, when are you coming out with the six turbo manifold. Heard it was about to drop next week

Ingeniator · 06-30-2014, 02:34 PM

Quote:

Originally Posted by 3000GT MR

Tiago, when are you coming out with the six turbo manifold. Heard it was about to drop next week

It uses 6 GT0632's right?

3000GT MR · 06-30-2014, 03:27 PM

Quote:

Originally Posted by Ingeniator

Quote:

Originally Posted by 3000GT MR

Tiago, when are you coming out with the six turbo manifold. Heard it was about to drop next week

It uses 6 GT0632's right?

Dude your retarded. It's 6x 6466's they hit full boost at 15k and they weigh enough to get the stance right

JC335xi · 06-30-2014, 04:20 PM

Quote:

Originally Posted by 3000GT MR

Dude your retarded. It's 6x 6466's they hit full boost at 15k and they weigh enough to get the stance right

Thanks for the sig quote! lololol

Torgus · 06-30-2014, 08:15 PM

Quote:

Originally Posted by JC335xi

Thanks for the sig quote! lololol

WTF I don't check the forum for an hour and I miss out on an epic sig quote.

3000GT MR · 07-01-2014, 07:00 PM

Quote:

Originally Posted by JC335xi

Quote:

Originally Posted by 3000GT MR

Dude your retarded. It's 6x 6466's they hit full boost at 15k and they weigh enough to get the stance right

Thanks for the sig quote! lololol

Not that I'm much better now but..... I was half lit when I wrote that.

06-29-2014, 04:02 PM	#1
F80M Major 88 Rep 1,456 Posts Drives: M Fap Join Date: Aug 2011 Location: in your rear view mirror... iTrader: (2)	VRSF Race/Street 335i Exhaust Heard there will be a revised 335i VRSF street exhaust releasing soon along with their race version. Is there any update on this? Thanks, J-
	Appreciate 0 Tweet Quote

06-29-2014, 05:23 PM	#2
Torgus Slow. 3782 Rep 7,151 Posts Drives: Single Turbo N54 on Meth! Join Date: Jun 2012 Location: Boston, MA iTrader: (2) Garage List 2007 BMW E92 [10.00] 2007 BMW E90 [0.00] 2006 BMW E91 [0.00]	Why don't you contact the manufacturer directly or at the very least tag Tiago in your post? Do you expect him to read every thread on this forum? BTW if it was available I am sure he would make a thread...I'll probably pick the revised version up once it is out. I'd grab the cobb but 3'' is lame. __________________ E92 ACF ST 6466 + Meth Motiv / E70 #1 fully deleted 2.8 race flash / E70 #2 JBD / E90 & E91 both retired Psalm 144
	Appreciate 0 Quote

06-29-2014, 07:51 PM	#9
Ingeniator Major 34 Rep 1,093 Posts Drives: 07 335XI(90) 09 135I(82) Join Date: Nov 2013 Location: Fort Mac, Alberta iTrader: (1)	In before lock. Seriously though you couldn't perhaps check the other thread asking the same question from 2 months ago. Still in development. It is a revised mid pipe and will likely be given free to gen1 owners. Also @tiago@VRSF __________________ 07 335XI (A008006) 6AT ~94K miles JB4 G5 ISO VSRF DP's 09 135I M (VK80379) 6MT. Race Project car. 1) Install Cobb/piggyback? and Motiv 600 Kit[HTA3076R w/ tial .82] 2) JRZ or Moton suspension. 3) Build high flow intake manifold with multi-port fuel and relocate OFH 4) Build full cage 5) Complete staged twin setup with HTA4205R [w/Tial 1.16] 6) Complete dry sump system
	Appreciate 0 Quote

06-29-2014, 08:20 PM	#10
pwr hungry Banned 41 Rep 1,257 Posts Drives: 335 Join Date: Mar 2013 Location: Amer'ca iTrader: (2)	He's into stance...he clearly doesn't understand how the engine forum works. Try the wheels or photos/videos section "brah"!
	Appreciate 0 Quote

06-30-2014, 05:03 AM	#12
Tiago@VRSF 2095 Rep 43,350 Posts Drives: F90 M5 Join Date: Dec 2007 Location: Doral, FL iTrader: (99) Garage List 2014 F30 328xi [0.00] 2015 F82 BMW M4 [0.00] 2013 Ducati 1199 Pa ... [0.00] 2008 BMW 335i [0.00]	We're still working on it, no exact ETA yet, should be 1-2 months.
	Appreciate 0 Quote

06-30-2014, 01:38 PM	#15
Torgus Slow. 3782 Rep 7,151 Posts Drives: Single Turbo N54 on Meth! Join Date: Jun 2012 Location: Boston, MA iTrader: (2) Garage List 2007 BMW E92 [10.00] 2007 BMW E90 [0.00] 2006 BMW E91 [0.00]	These stance kids are fun. __________________ E92 ACF ST 6466 + Meth Motiv / E70 #1 fully deleted 2.8 race flash / E70 #2 JBD / E90 & E91 both retired Psalm 144
	Appreciate 0 Quote

06-30-2014, 02:02 PM	#16
3000GT MR Major 265 Rep 1,392 Posts Drives: 09 335i/3000gt vr4 Join Date: Jun 2012 Location: Sav GA iTrader: (6)	Tiago, when are you coming out with the six turbo manifold. Heard it was about to drop next week __________________ Have a single turbo and/or tired of burning up O2 sensors? Ask me about the new ADV O2 sensor retro kits! 335i 2010 e92 M-sport Mods: VM Top mount 6466, Aquamist HSF4 w/custom direct port. VRSF IC + Exhaust 335i 2009 e90 665RWHP VFF900 ST RIP .
	Appreciate 0 Quote