[dapz325]

Hey guys , I just installed a bms methanol kit I got from topgear solutions (great service). I did a log but something just doesn't feel right .I hit 17psi in boost but my booty dyno just doesn't feel it at all. Also the pump pulses as you will see in the log. I was wondering if someone can tell me if something doesn't look right. My current mods are Jb4, dci , meth with 93 octane (downpipes coming very soon). I have the standard settings for everything. My meth mixture is about 70/30 meth to water. If someone could chime in that would be great!

http://datazap.me/u/dapz325/methanol?log=0&data=1-4

[Jeff@TopGearSolutions]

Looks like you have air in the lines or something. You could probably raise your meth additive a touch once you get your meth spraying correct.

[dapz325]

Thanks I will recheck all the fittings all around. What do you recommend I raise the meth additive to? I also heard a strange whistle sound coming from the engine after the install. I thought its the meth elbow , that it wasn't air tight. From a feel from the hand and visual inspection seems fine. Any other possible culprits?

[j1gilles]

Originally Posted by dapz325

Thanks I will recheck all the fittings all around. What do you recommend I raise the meth additive to? I also heard a strange whistle sound coming from the engine after the install. I thought its the meth elbow , that it wasn't air tight. From a feel from the hand and visual inspection seems fine. Any other possible culprits?

You didnt dislodge the rear turbo intake tube did you? It can happen if you are messing around with the rear intake tube.. It can make a distinct "whistling" noise when disconnected.

[dapz325]

Well after checking and resealing all the connections I still have pulsing . I read that this happens when the pump is maxed out and it causes wear on the pump. Has anyone else had this problem with aqua mist pumps? I can feel the power of the car fluctuating when w.o.t.

[cwarren]

did you bleed the system ?