[yahtzee]

Just finished installing V2 (cant get the vacuum lines back to stock - see other post asking for help).....

I have a few wires left over and am wondering if they are for future features as I followed the instructions verbatum. Coming off of the V2 piece there are 4 wires - a black and blue coupled together and a black and green coupled together.....please tell me I am not missing something......


Also, it would really help if someone could take a peek at my thread - http://www.e90post.com/forums/showpo...62&postcount=6
and let me know if anyone can guide me back to stock.

[rooster3.0]

The only thing you should have left is the old green loom the ran to pin 10. If you have anything else, you missed a step.

[NPDAN]

Looking at the pictures I cant see the open stems that you pulled the vacuum lines from with the v1.47. Did you not hook this up yourself originally? What are the issues your having with the reverting the lines back to stock? Can you not get them off of the connectors

[yahtzee]

Originally Posted by NPDAN

Looking at the pictures I cant see the open stems that you pulled the vacuum lines from with the v1.47. Did you not hook this up yourself originally? What are the issues your having with the reverting the lines back to stock? Can you not get them off of the connectors

Ironically, my service manager said that he "figured it out". Not possible that 1.47 could run with the hooked up like they were from the factory, is it?

[lawdude]

Originally Posted by yahtzee

Just finished installing V2 (cant get the vacuum lines back to stock - see other post asking for help).....

I have a few wires left over

Dayum.

[yahtzee]

Originally Posted by lawdude

Dayum.

Ha....it's much better than it seems. It appears that when I printed off the installation instructions from Vishnu Forums, it left out quite a bit of text....pulled up the site in my garage and went through it that way and had no issues. Nothing left over and she's running like a top.

[OpenFlash]

Originally Posted by yahtzee

Ha....it's much better than it seems. It appears that when I printed off the installation instructions from Vishnu Forums, it left out quite a bit of text....pulled up the site in my garage and went through it that way and had no issues. Nothing left over and she's running like a top.

Glad to hear.

[NPDAN]

Shiv, I tried to PM you but your box is full. Here's what I say...

Hey Shiv, I have previously installed the new firmware and the 12-24 map. Any reason for me to install the 12-29 map? I seem to be ok with the 12-24 map.

thanks bro,

Dan