|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
FS: 3-stage intake manifold
|
|
10-05-2014, 12:55 PM | #1 |
New Member
1
Rep 24
Posts |
FS: 3-stage intake manifold
**** SOLD! **** thanks for the interest everyone Up for sale is a 3-stage intake manifold. It is off of an 06 530Xi, and has one crankcase ventilation port at the base of the manifold (and the oil separator should be mounted on the manifold itself). I believe it is part number 11617559523. I was going to use this for my swap, but upon digging into it, realized our E91 has the oil separator built into the vc and i happened upon a 3-stage manifold with the two ports at the base of the manifold, so i opted to use that one instead. Keep in mind, if your N52 has the oil separator built into the vc, you can still utilize this single port manifold if you just plug the extraneous end of your crankcase vent tube. The manifold has nothing attached to it, so you will need to get new DISA adjusters, intake gaskets (highly suggest a new throttle body gasket too) and transfer all the ancillary brackets etc over from your existing single-stage manifold. $180 shipped
__________________
| E30 M3 | E34 M5 | E38 740i M-Sport | E53 4.6is | E91 328Xi |
Last edited by duboy; 10-08-2014 at 07:32 AM.. Reason: it be sold |
Bookmarks |
|
|