Need DIY instructions on changing D1S bulb in E90 335i

cstmx_ryder · 12-29-2007, 05:40 PM

Anyone has done or has the installation instructions on how to take off the cover to the xenons?

I've gotten as far as TRYING to take the cover off, but I couldn't get the clips to pop off........Tried using a flathead screw driver to unclip the cover, but had no luck.

I followed the instructions to one of the DIYs on how to replace the DRLs in this forum, but I need more detailed instructions as to how to get the cover to come off in order to get to the D1S bulbs.

Any help is appreciated.....

nyc3r · 12-29-2007, 08:56 PM

the DRL diy should be enough. unclip the top (2 clips) then push/pull toward rear of car and cover should come off. I haven't done a D1S bulb replacement but I imagine it would be similar to the D1S diy for E92.

Kev · 12-29-2007, 09:27 PM

The cover simply pops off once you release the tabs. Once you are in, unplug the wiring harness to the bulb and undo the metal clip that is holding the bulb in place.

cstmx_ryder · 12-30-2007, 11:54 AM

That's the thing, I know how to unplug the wire once I'm in the headlight housing. But I just couldn't get the headlight housing cover off for the life of me!! I don't want to pry too hard at the clips and accidentally break something........

There's gotta be a simple way of popping off that cover..........Anyone?

P.S. The DIY for changing the DRLs are not specific/detailed enough as far as telling me how to get the cover off.......It just says there's three clips that needed to be unclipped.......But HOW??

SKY888 · 05-05-2008, 04:03 PM

Any update to this? Those clips are so hard to get off.

12-29-2007, 05:40 PM	#1
cstmx_ryder Colonel 165 Rep 2,875 Posts Drives: A metal box with a roundel Join Date: Jul 2007 Location: Portland, OR iTrader: (2)	Need DIY instructions on changing D1S bulb in E90 335i Anyone has done or has the installation instructions on how to take off the cover to the xenons? I've gotten as far as TRYING to take the cover off, but I couldn't get the clips to pop off........Tried using a flathead screw driver to unclip the cover, but had no luck. I followed the instructions to one of the DIYs on how to replace the DRLs in this forum, but I need more detailed instructions as to how to get the cover to come off in order to get to the D1S bulbs. Any help is appreciated..... __________________ '08 AW E90 335i PROcede V5 \| BMS DCI \| RR DPs \| ETS FMIC \| FORGE DVs \| Stett CP \| Vanguard \| PSS10
	Appreciate 0 Tweet Quote

12-29-2007, 08:56 PM	#2
nyc3r Colonel 112 Rep 2,589 Posts Drives: E90 Join Date: Jun 2006 Location: USA iTrader: (24)	the DRL diy should be enough. unclip the top (2 clips) then push/pull toward rear of car and cover should come off. I haven't done a D1S bulb replacement but I imagine it would be similar to the D1S diy for E92. __________________ FS: Interior Parts - Msport knob, split armrest etc FS: Interior Parts Msport wheel, Msport knob, Boot, Idrive, FS: BMW factory oil change kit
	Appreciate 0 Quote

12-29-2007, 09:27 PM	#3
Kev Critical Care Anesthesiologist 482 Rep 8,828 Posts Drives: SMB F83 Join Date: Aug 2006 Location: Seattle, WA iTrader: (24) Garage List 2009 Porsche 911 Ca ... [9.50]	The cover simply pops off once you release the tabs. Once you are in, unplug the wiring harness to the bulb and undo the metal clip that is holding the bulb in place. __________________ kev { divinum est sedate dolorem } "your friendly neighborhood critical care anesthesiologist"
	Appreciate 0 Quote

12-30-2007, 11:54 AM	#4
cstmx_ryder Colonel 165 Rep 2,875 Posts Drives: A metal box with a roundel Join Date: Jul 2007 Location: Portland, OR iTrader: (2)	That's the thing, I know how to unplug the wire once I'm in the headlight housing. But I just couldn't get the headlight housing cover off for the life of me!! I don't want to pry too hard at the clips and accidentally break something........ There's gotta be a simple way of popping off that cover..........Anyone? P.S. The DIY for changing the DRLs are not specific/detailed enough as far as telling me how to get the cover off.......It just says there's three clips that needed to be unclipped.......But HOW?? __________________ '08 AW E90 335i PROcede V5 \| BMS DCI \| RR DPs \| ETS FMIC \| FORGE DVs \| Stett CP \| Vanguard \| PSS10
	Appreciate 0 Quote

05-05-2008, 04:03 PM	#5
SKY888 Private First Class 3 Rep 136 Posts Drives: E92 M3 Join Date: Aug 2007 Location: CANADA iTrader: (1)	Any update to this? Those clips are so hard to get off.
	Appreciate 0 Quote