10-17-2014, 08:49 PM | #1 |
Major
163
Rep 1,053
Posts |
Will this offset fit?
Square 18x8 ET32 with 225/40/18 tires.
I'm guessing no since it seems like it'd be poking out 20mm more than stock. Please correct me if I'm wrong. It's kind of disappointing since the wheel I had hoped to get is this size. |
10-24-2014, 04:44 PM | #2 |
First Lieutenant
463
Rep 383
Posts
Drives: F13 M6 | E92 M3 | '15 Mustang
Join Date: Jul 2014
Location: Anaheim, California
|
With 225 width tires and stock suspension (no front camber adjustment), it will be pretty tight. On our 228i we initially had 18x8.5 +38 with 235s all around which is essentially the same fit and they needed a little bit of additional camber to clear the fenders.
|
Appreciate
0
|
10-24-2014, 05:57 PM | #3 |
Brigadier General
1773
Rep 4,510
Posts |
+1 on GSR's advice. I have oem style 397s all square 18" x 8" x 34mm et with std staggered tyres with H&R sport springs. It's flush and no rubbing but I would not go with more poke than I have now.
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|