|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
How to code a new FRM 2 Module for my car
|
|
01-28-2015, 01:22 PM | #1 |
Enlisted Member
2
Rep 47
Posts |
How to code a new FRM 2 Module for my car
I have a Frm2 NSw right now and I just got a FRM 2 AHL. I need some help how to add the vin to this and how to code this for my car.I have a E90 328i 07
Thanks Last edited by ovi1984; 01-28-2015 at 01:52 PM.. |
01-28-2015, 03:33 PM | #2 |
Banned
11
Rep 177
Posts |
|
Appreciate
0
|
01-29-2015, 08:36 AM | #4 |
Enlisted Member
2
Rep 47
Posts |
Thanks guys, Is there andy guides how to do each of this. I know how to code in NCS expert but WINKFP or Tool32 is new for me.And how do I do this "copy all VOs number from CAS to NFRM and recode NFRM"
Thanks |
Appreciate
0
|
04-18-2015, 04:18 AM | #5 |
Captain
93
Rep 713
Posts |
To copy all VOs from CAS to NFRM you have to do these steps:
1) Start NCSEXPERT 2) Load Expert Mode 3) Press F1 VIN/ZCS/FA 4) Press F3 ZCS/FA f. ECU 5) Select your CHASSIS (E89 in your exmpale) 6) In this step you will see 3 options (CAS/NFRM/FRM) - Choose CAS and click OK 7) Your VIN should be determine now 8) Select F2 ENTER FA 9) VIN field will be automatically populated - Click OK 10) Now you can see all your VOs 11) Don't change anything, just click OK 12) Press F6 (BACK) 13) Press F4 (Process ECU) 14) Select NFRM 15) Press F2 (Change Job) 16) Select FA_WRITE 17) Press OK 18) Select F3 (Execute Job) Your all VOs are now copied from CAS to NFRM. 19) Press F1 (Change ECU) 20) Select NFRM 21) Press F2 (Change Job) 22) Select SG_CODIEREN 23) Press F3 (Execute Job) That's all. CHANGE VIN Start Tool32 and follow the screens below: select c_fg_schreiben to change a VIN. Your VIN has 17 digits + 0 (0 is the sum control) you can simply check what is your sum control determining VIN number in NCSEXPERT. See last screenshot. Last edited by cryptomit; 04-18-2015 at 04:39 AM.. |
Appreciate
0
|
Bookmarks |
|
|