Deactivating seatbelt buzzer with NCSExpert

ros2468 · 02-01-2015, 09:02 AM

I have been coding the seatbelt sound off several times and it´s still there.

Also the option is activated when done coding!

I follow this procedure:

1. read airbag module.
2. change in .trc file and save to .man
3. change job and code.

4.turn off car.
5.read airbag module.

js335in54 · 02-01-2015, 10:40 PM

Quote:

Originally Posted by ros2468

I have been coding the seatbelt sound off several times and it´s still there.

Also the option is activated when done coding!

I follow this procedure:

1. read airbag module.
2. change in .trc file and save to .man
3. change job and code.

4.turn off car.
5.read airbag module.

you need to edit your profile on ncs then set it up properly

js335in54 · 02-02-2015, 12:35 PM

here this is what you need to edit on your profile... if this boxe are not checked then everytime you trying to code something it wont work. just make sure the profile you always always use has this checkboxes mark.

02-01-2015, 09:02 AM	#1
ros2468 Registered 0 Rep 2 Posts Drives: It´s very nice. Join Date: Oct 2014 Location: Norway iTrader: (0)	Deactivating seatbelt buzzer with NCSExpert I have been coding the seatbelt sound off several times and it´s still there. Also the option is activated when done coding! I follow this procedure: 1. read airbag module. 2. change in .trc file and save to .man 3. change job and code. 4.turn off car. 5.read airbag module.
	Appreciate 0 Tweet Quote

02-02-2015, 12:35 PM	#3
js335in54 Banned 11 Rep 177 Posts Drives: BMw e92 Join Date: Jun 2014 Location: Norwalk iTrader: (-1)	edit your profile here this is what you need to edit on your profile... if this boxe are not checked then everytime you trying to code something it wont work. just make sure the profile you always always use has this checkboxes mark. Attached Images
	Appreciate 0 Quote