[zahid786zed]

hi
i have retrofitted bi xenon lci headlights to my e90 which originally had halogen lights, i brought a frm 3 xenon module and fitted this to the car. i have managed to get most features to work on the lights except the shutter to open and close when pulling the flash stalk. when i had my original frm module in the car the shutter was opening and closing when flashing but since i have put the frm 3 module in my car when pulling the flash stalk no shutter working.

i have read many threads on here before asking this but all that i have read havent worked for me. the xenon lines on my frm are the following:

XENON_AL_VERBAUT
aktiv
XENON_LI
wert_02
PWM_FL_BEI_BIXENON
wert_02
wert_03
BI_XENON_BEI_LH_3R
aktiv

i did try changing the bixenon line to both wert_01 as stated by another member but this still did not make the shutter work. when pulling the stalk the xenon bulb does light up so i am half way there just the shutter to make work?
does anyone know what line needs changing to make the shutter work on a frm3 module?
thanks in advance

i have also attached my full frm trc file.

[makkan00]

Its simple.
Frm3 has different pin for shutter than frm2.

[zahid786zed]

Makkan do you know what i have to change to get it working is it some of the wiring to the frm module?
If so have you got the wiring diagrams for frm 1 and frm 3. Cheers