[timothy2001]

Anyone know how to get at the front dome light socket on a 2011 335I?

Do I need to go in from the headliner at the top of the windshield and release clips?

[wdeerfield]

[timothy2001]

I appreciate the video as I watched it when I needed to know how to replace the BULB.

If you can post a video on how to replace the SOCKET I would be even more grateful.

I know the Albany area doesn't have the best schools but the bulb is easy as originally stated it's the socket I need to replace.

BTW, just kidding about the schools. I lived in the area for too long.

[Jeff@TopGearSolutions]

I sent an email to HPB. I'm thinking it requires removal of the housing and access at the top.

[grzes]

Yes You do and to remove socket you twist them I believe 45deg. or 90.

ha ha, I did watch that video as well when replacing OEM with LED's but I could not take the bulb out how it shows in the video, had to remove the whole panel, twist the sockets out and only then bulb came out (BMW tech told me that is how they do it) I have 2009 not 2011, but they all look the same so I am assuming you have to do the clips, I found it easier to make a little hook from the old hanger, then look for the clips in the small map light (the ones on the sides, you can see them in small openings) and pull the clips that way. This way you don't pull on your headliner and you don't risk of bending the metal ring that goes around the entire fixture.

[Kenti]

2 tabs (1 right in front of each reading light) that needs to be pushed back towards the rear of the car. Then the entire dome will come down and you will easily see how to remove them.

[timothy2001]

Thank you thank you thank you thank you thank thank you

I won. Replaced it and nothing broken.

[wdeerfield]

Originally Posted by timothy2001

I appreciate the video as I watched it when I needed to know how to replace the BULB.

If you can post a video on how to replace the SOCKET I would be even more grateful.

I know the Albany area doesn't have the best schools but the bulb is easy as originally stated it's the socket I need to replace.

BTW, just kidding about the schools. I lived in the area for too long.

that video shows you how to "get at the socket" it plugs into..

Originally Posted by timothy2001

Anyone know how to get at the front dome light socket on a 2011 335I?

didnt quite ask how to replace the socket.

sorry it wasnt a complete help. i was browsing the forum while i was working and remembered that video showed how to get at the dome light area. Honestly didnt watch it all and just scanned. figured it be some help and went back to working..

not sure what albany schools has to do with it since i didnt go to them.

[timothy2001]

Originally Posted by wdeerfield

that video shows you how to "get at the socket" it plugs into..


didnt quite ask how to replace the socket.

sorry it wasnt a complete help. i was browsing the forum while i was working and remembered that video showed how to get at the dome light area. Honestly didnt watch it all and just scanned. figured it be some help and went back to working..

not sure what albany schools has to do with it since i didnt go to them.

I used to have an office in Clifton Park so I was just taking a shot at the Capitol District in general. In all sincerity I appreciate your assistance and anyone who contributes on these forums. They are invaluable.

[wdeerfield]

Originally Posted by timothy2001

I used to have an office in Clifton Park so I was just taking a shot at the Capitol District in general. In all sincerity I appreciate your assistance and anyone who contributes on these forums. They are invaluable.

no worries my man.