v2 Software Bug

NM_BMW · 01-25-2008, 06:48 PM

Nothing major, but I did notice a bug when I was getting ready to log tonight. When you are removing channels to log, if you don't have anything selected and you hit the << the whole program crashes. I was able to repeat this every time. It works fine if there is a channel selected, but if not the program crashes. Just thought I'd point it out if it hasn't already been brought to the table.

hov333 · 01-25-2008, 07:04 PM

in addition, if u close the laptop's lid, when it comes out of standby the program crashes as well

OpenFlash · 01-25-2008, 07:11 PM

Hmmm yeah... Don't do that

shiv

NM_BMW · 01-25-2008, 07:17 PM

Quote:

Originally Posted by hov333

in addition, if u close the laptop's lid, when it comes out of standby the program crashes as well

I don't have that problem and usually when I turn off the car I'll close the lid of the laptop with the procede software still open. When I get inside to check the log the software is still open and functioning.

Quote:

Originally Posted by shiv@vishnu

Hmmm yeah... Don't do that

shiv

I really didn't mean to do it either... lol I just forgot to select a channel to remove and crash... Funny thing is if you try doing it with the >> button it doesn't crash. Just a bug, but I thought I'd report it anyways.

hov333 · 01-25-2008, 07:18 PM

quick question...everytime I open the procede program, it says loading map on the bottom of the window....what map is it loading and how do I know which one is active on the car???

NM_BMW · 01-25-2008, 07:20 PM

Are you connected to the procede when it is doing this process? If yes, then it is loading the map that is stored on the procede.

hov333 · 01-25-2008, 07:30 PM

yes, right when I connect and start the program it says this...also, whats the best way to upload a new map or change the torque settings, do I need to have the ignition off but the car on? or is it ok to load while the car is started?

OpenFlash · 01-25-2008, 07:40 PM

Quote:

Originally Posted by hov333

yes, right when I connect and start the program it says this...also, whats the best way to upload a new map or change the torque settings, do I need to have the ignition off but the car on? or is it ok to load while the car is started?

You can adjust user tq or update maps with the engine running or not. Doesn't matter. Just make sure the ignition is fully ON. You will no this because your gas gauge will work. To load a new map, just to File---> Open... and select the new map.

Shiv

hov333 · 01-25-2008, 07:48 PM

cool thanks for the info shiv, I was just confused since the orginal install instructions told me to have the car on but ignition off to upload the new map initially, unless i'm mixing that up with something else.

edit: ok wait a minute, when u said ignition on u didnt mean engine on...ok so I guess I meant, engine has to be off when loading. ok

01-25-2008, 06:48 PM	#1
NM_BMW Vishnu Powered 68 Rep 2,205 Posts Drives: 335xi, S1000RR Join Date: Nov 2007 Location: Proceding iTrader: (7)	v2 Software Bug Nothing major, but I did notice a bug when I was getting ready to log tonight. When you are removing channels to log, if you don't have anything selected and you hit the << the whole program crashes. I was able to repeat this every time. It works fine if there is a channel selected, but if not the program crashes. Just thought I'd point it out if it hasn't already been brought to the table.
	Appreciate 0 Tweet Quote

01-25-2008, 07:04 PM	#2
hov333 Major 63 Rep 1,003 Posts Drives: 2016 M5 Join Date: Sep 2007 Location: Boston, MA iTrader: (1)	in addition, if u close the laptop's lid, when it comes out of standby the program crashes as well
	Appreciate 0 Quote

01-25-2008, 07:11 PM	#3
OpenFlash 1743 Rep 17,960 Posts Drives: A Lot Join Date: Sep 2006 Location: SF Bay, CA iTrader: (0) Garage List 2018 Ducati Panigal ... [0.00] 2016 Mazda CX5 [0.00] 2017 Aprilia Tuono ... [0.00] 2019 BMW M2 Competi ... [0.00] 2015 BMW M5 Competi ... [10.00] 2016 Ducati XDiavel S [0.00] 2016 AMG GT S [0.00] 2011 Ferrari 458 It ... [0.00] 2017 Charger Hellcat [0.00] 2015 KTM Super Duke ... [0.00] 2016 KTM RC390 [0.00]	Hmmm yeah... Don't do that shiv
	Appreciate 0 Quote

01-25-2008, 07:18 PM	#5
hov333 Major 63 Rep 1,003 Posts Drives: 2016 M5 Join Date: Sep 2007 Location: Boston, MA iTrader: (1)	quick question...everytime I open the procede program, it says loading map on the bottom of the window....what map is it loading and how do I know which one is active on the car???
	Appreciate 0 Quote

01-25-2008, 07:20 PM	#6
NM_BMW Vishnu Powered 68 Rep 2,205 Posts Drives: 335xi, S1000RR Join Date: Nov 2007 Location: Proceding iTrader: (7)	Are you connected to the procede when it is doing this process? If yes, then it is loading the map that is stored on the procede.
	Appreciate 0 Quote

01-25-2008, 07:30 PM	#7
hov333 Major 63 Rep 1,003 Posts Drives: 2016 M5 Join Date: Sep 2007 Location: Boston, MA iTrader: (1)	yes, right when I connect and start the program it says this...also, whats the best way to upload a new map or change the torque settings, do I need to have the ignition off but the car on? or is it ok to load while the car is started?
	Appreciate 0 Quote

01-25-2008, 07:48 PM	#9
hov333 Major 63 Rep 1,003 Posts Drives: 2016 M5 Join Date: Sep 2007 Location: Boston, MA iTrader: (1)	cool thanks for the info shiv, I was just confused since the orginal install instructions told me to have the car on but ignition off to upload the new map initially, unless i'm mixing that up with something else. edit: ok wait a minute, when u said ignition on u didnt mean engine on...ok so I guess I meant, engine has to be off when loading. ok
	Appreciate 0 Quote