[e.n335]

Hi,

We have end of January soon and I would like to know about the project status of v2.0.3.

- Some users still experience limp modes shifting at redline, will it be corrected ?
- Has the speed limit defeat tested from Vishnu and is it working without DME error entries ?
- When will dedicated maps for the 6AT 335i's be available again ?

And finally:

When will v2.1 be available and which additional functions can we expect ?

The current V2 implementation is pretty stable already. Vishnu did a good job further developing the PROcede. I would like to use it as my definitely engine tuning.

Thank you in advance for your feedback.

Ciao,
Eugen

[remydlc]

+1

Didnt now they are still limps by shifting at redline. Does that apply to MT, AT or both?

Yes, we need to know the features and availability for v2.1, some of us still have V2 out of the car yet, will be nice to know when is it going to be out so we load it/install it with the newer map.

Thanks

[e.n335]

Originally Posted by remydlc

+1

Didnt know they are still limps by shifting at redline ...

http://www.e90post.com/forums/showthread.php?t=109958

[Thomasz126]

I still limp on a cold start. Car doesn't seem to want to go past 3k rpm on a cold start, it would limp right away. Hope the next upgrade fixes these issues. Anybody else experiencing jerking??

[e.n335]

Originally Posted by Thomasz126

I still limp on a cold start. Car doesn't seem to want to go past 3k rpm on a cold start, it would limp right away. Hope the next upgrade fixes these issues. Anybody else experiencing jerking??

Which map are you using ? Additional mods ?

[remydlc]

Have anyone else had it besides him?

IMO, I would not call that an official "limp due to shifting at redline" since he could not replicate the problem not even once, and have shifted in redline many times before without getting limp.

[e.n335]

The great things with the PROcede are UT, speed limiter defeat, loadable firmware and maps and data logging. As well as the rugged hardware. It is the only N54 engine tuning piggyback solution providing these attributes. However, it has to be as stable as the Dinan flash. I believe the PROcede can achieve this but it is not there. More R&D is still needed, IMO.

[CarveOut]

Originally Posted by e.n335

Hi,
- Has the speed limit defeat tested from Vishnu and is it working without DME error entries?

I know Shiv had fixed the speed clamp but other question: Will it be officially supported with the next release?

[remydlc]

I agree with you. PROcede is a complex piggyback, same thing happens to complex application/software, they implement a new feature and boom! a new bugs comes out. Whereas, simple apps/software most of the time dont have problems at all. Example of this is Windows' Notepad VS Microsoft Word, they have beens so many bugs for Word, it is not a joke.

If our car was ever connected to the internet, the procede would have been exploited many times lol.

[Tuned335i]

Subscribed

[LambOfGod]

I've been running the 1-10 updated maps and have not had any problems. I'm running a 335 AT 94% 94Oct and hitting about 14.2PSI in 20F temps. No Limps. I unplugged for an hour and let it addapt. Seem like everything is good...so far. (Until someone looses and eye)

[sflgator]

Eugen,

My thread on this subject and Shiv's response...

http://www.e90post.com/forums/showthread.php?t=109188

"Hi guys,
There will be two version of v2.1. One for catless cars as well as one for catted cars. We will be offering it to our beta test group within the next week."

Shiv

http://www.e90post.com/forums/showpo...9&postcount=30
______

[NM_BMW]

Originally Posted by remydlc

Have anyone else had it besides him?

IMO, I would not call that an official "limp due to shifting at redline" since he could not replicate the problem not even once, and have shifted in redline many times before without getting limp.

I wasn't able to replicate the limp. After I hit limp and shut down and started her back up I did another hard pull in 3rd, not to redline, but a hard pull and the car ran strong. I haven't had a chance today to go do another redline pull to see if I can reproduce. After looking at my logs last night and again this morning I hit limp around 6800rpm. Besides the one limp I hit with the 1-10-08 map I believe it is very stable. It was a weird occurance non the less, but I've been running this map for two weeks now and this was the first problem I ran into.

EDIT: BTW the speed delimit is still not fixed, but the problem has been identified.

Originally Posted by shiv@vishnu

Guys,
The problem has been identified. It is not the wire itself. But how the signal is replicated during start-up. We are in the process of fixing it. So don't bother installing the green wire just yet. It's an officially unsupported feature to begin with

Shiv

[e.n335]

@sflgator:

Thank you for the links. I have been out working and skiing for a week and need to catch up .

Cheers,
Eugen

[sflgator]

Originally Posted by e.n335

@sflgator:

Thank you for the links. I have been out working and skiing for a week and need to catch up .

Cheers,
Eugen

I'm very jealous of you skiing in your Swiss Alps!!!!

[e90AW335i]

Originally Posted by sflgator

I'm very jealous of you skiing in your Swiss Alps!!!!

+1, I was about to say the same thing. Eugen is very lucky...

[e.n335]

Originally Posted by sflgator

I'm very jealous of you skiing in your Swiss Alps!!!!

Skiing has been great . Back again I decided and arranged everything to go with the e92 19" M3 replicas in March 2008. They will look good on my car.

Life is good to me . Sorry for OT.

[WilyB]

Originally Posted by sflgator

I'm very jealous of you skiing in your Swiss Alps!!!!

Well technically, our friend Eugen is Austrian... Look at the little flag.

[sflgator]

Originally Posted by WilyB

Well technically, our friend Eugen is Austrian... Look at the little flag.

But he lives in Switzerland. Either way, Austria or Switzerland...they have some of the world's best skiing.