M-Performance Brake

CedarZ4 · 05-20-2015, 06:45 PM

I'm looking to get the BMW-Performance Brake System Kit (Part #34-11-2-221-447) and was wondering what was included in the kit? Can't seem to get through to the service department via phone, and different pictures online are showing different parts being included. For those that have ordered it as a kit from BMW, what's included?

Obviously,
-2 Front Caliper
-2 Front Rotor
-2 Rear Caliper

I know the rear rotors are sold separately. But what about heat shield/protection plates, brake pads, wear sensors, hardware for mounting (screws, nuts, brackets, clips etc.)?

zamboni · 05-21-2015, 01:28 AM

Kit Includes:
Front-
6 Piston calipers
13.3" Rotors
Brake pads
Backing plates
Misc hardware
Rear-
Larger single piston caliper
11.8" Rotors
Brake pads
Misc hardware

stormlv · 05-21-2015, 01:33 AM

Quote:

Originally Posted by zamboni

Kit Includes:
Front-
6 Piston calipers
13.3" Rotors
Brake pads
Backing plates
Misc hardware
Rear-
Larger single piston caliper
11.8" Rotors
Brake pads
Misc hardware

Front:
- Four piston front calipers, pads & wear sensors
- Dimpled, slotted and vented rotors (370x30mm)
- Rotor shield protection plates

Rear:
- Two piston rear calipers, pads and wear sensors
- Rotor shield protection plates

You must get the rear rotors (345x24mm)

CedarZ4 · 05-21-2015, 07:29 AM

Thanks fellas. I knew I could count on the forums

So for clarifications, "misc hardware" for mounting are included (as stormlv didn't have them listed). From there, it's all PnP, nothing else I need to buy separately?

lance666 · 11-14-2015, 08:10 PM

hi guys, just wondering if u guys change the brake hose since its not included with the kit?
any difference with existing ones in 320i?

CedarZ4 · 11-16-2015, 11:10 AM

I used the stock brake lines; I don't think think buying OEM ones would make any difference, unless you go for aftermarket stainless steal lines.

QUiKSR20 · 11-16-2015, 11:16 AM

So do all OEM Brake Upgrades on the F30 use the same master cylinder / prop valves ? If so then caliper swaps for brake upgrades will be cake..
Im looking to swap some 335i ( non painted brembos ) onto my F30 328i with stock brakes.

_bdiddyb_ · 11-16-2015, 11:18 AM

stainless steel lines, sure - why not go all the way.

Polo08816 · 11-16-2015, 11:39 AM

Quote:

Originally Posted by zamboni

Kit Includes:
Front-
6 Piston calipers
13.3" Rotors
Brake pads
Backing plates
Misc hardware
Rear-
Larger single piston caliper
11.8" Rotors
Brake pads
Misc hardware

?

The following below is correct:

Quote:

Originally Posted by stormlv

Front:
- Four piston front calipers, pads & wear sensors
- Dimpled, slotted and vented rotors (370x30mm)
- Rotor shield protection plates

Rear:
- Two piston rear calipers, pads and wear sensors
- Rotor shield protection plates

You must get the rear rotors (345x24mm)

techwhiz · 11-18-2015, 02:36 PM

Quote:

Originally Posted by Polo08816

?

The following below is correct:

In the kit is everything you need to have them bolt up.
The rear rotors are optional.
You can source the kit from a couple of places and they include the rear rotors at a single price.

I paid $1900 including rear rotors.
Current price including rear rotors is $2100 new on eBay.

leonmckee · 11-20-2015, 08:43 AM

There's also a $300 rebate right now (U.S.) if you purchase from a BMW dealer:

http://bmwrebateoffers.com

Leon McKee

leonmckee · 11-20-2015, 08:46 AM

Also, make sure you check this post:

http://f30.bimmerpost.com/forums/sho...72&postcount=7

Leon McKee

Jonathan@BimmerWorld · 11-27-2015, 12:45 PM

Quote:

Originally Posted by techwhiz

In the kit is everything you need to have them bolt up.
The rear rotors are optional.
You can source the kit from a couple of places and they include the rear rotors at a single price.

I paid $1900 including rear rotors.
Current price including rear rotors is $2100 new on eBay.

We normally have this kit for a bit more, but our Black Friday Door Buster is significantly less today; includes 370x30mm front and 345x24mm rear rotors:

http://store.bimmerworld.com/doorbus...n-m-p2431.aspx

05-20-2015, 06:45 PM	#1
CedarZ4 Captain 63 Rep 715 Posts Drives: G05 M50i, Tesla M3P Join Date: Jan 2013 Location: SoFL iTrader: (2)	M-Performance Brake - What comes with the kit? I'm looking to get the BMW-Performance Brake System Kit (Part #34-11-2-221-447) and was wondering what was included in the kit? Can't seem to get through to the service department via phone, and different pictures online are showing different parts being included. For those that have ordered it as a kit from BMW, what's included? Obviously, -2 Front Caliper -2 Front Rotor -2 Rear Caliper I know the rear rotors are sold separately. But what about heat shield/protection plates, brake pads, wear sensors, hardware for mounting (screws, nuts, brackets, clips etc.)? Last edited by CedarZ4; 05-20-2015 at 06:53 PM..
	Appreciate 0 Tweet Quote

05-21-2015, 01:28 AM	#2
zamboni I want to drive a Zamboni 1128 Rep 5,554 Posts Drives: 13 E93 M3 18 F80 M3 16 K71 Join Date: Mar 2006 Location: Monte Sereno, CA iTrader: (7) Garage List 16 K71 F800GT [10.00] 2018 F80 M3 [10.00] 2013 BMW E93 M3 [10.00]	Kit Includes: Front- 6 Piston calipers 13.3" Rotors Brake pads Backing plates Misc hardware Rear- Larger single piston caliper 11.8" Rotors Brake pads Misc hardware __________________ 18 F80 Imola Red 6MT 16 K71 F800GT Montego Blue 13 E93 M3 Melbourne Red 2000 E46,2006 E90,09 E82,13 E93 328i,14 F30 335i,18 F80 M3 My next vehicle would be a Zamboni
	Appreciate 0 Quote

05-21-2015, 07:29 AM	#4
CedarZ4 Captain 63 Rep 715 Posts Drives: G05 M50i, Tesla M3P Join Date: Jan 2013 Location: SoFL iTrader: (2)	Thanks fellas. I knew I could count on the forums So for clarifications, "misc hardware" for mounting are included (as stormlv didn't have them listed). From there, it's all PnP, nothing else I need to buy separately?
	Appreciate 0 Quote

11-14-2015, 08:10 PM	#5
lance666 Private First Class 53 Rep 123 Posts Drives: 320i Join Date: Oct 2014 Location: SG iTrader: (0)	hi guys, just wondering if u guys change the brake hose since its not included with the kit? any difference with existing ones in 320i?
	Appreciate 0 Quote

11-16-2015, 11:10 AM	#6
CedarZ4 Captain 63 Rep 715 Posts Drives: G05 M50i, Tesla M3P Join Date: Jan 2013 Location: SoFL iTrader: (2)	I used the stock brake lines; I don't think think buying OEM ones would make any difference, unless you go for aftermarket stainless steal lines.
	Appreciate 0 Quote

11-16-2015, 11:16 AM	#7
QUiKSR20 Major 362 Rep 1,407 Posts Drives: 13' F30 328i 6MT Join Date: Mar 2012 Location: NJ iTrader: (17) Garage List 2013 BMW 328i Sport [10.00] 92 Sentra SE-R Turb ... [0.00]	So do all OEM Brake Upgrades on the F30 use the same master cylinder / prop valves ? If so then caliper swaps for brake upgrades will be cake.. Im looking to swap some 335i ( non painted brembos ) onto my F30 328i with stock brakes. __________________ '13 F30 328i Sport 6MT \| '18 G01 X3 xDrive30i \| '95 E36 325i Vert 5MT 92 Sentra SE-R SR20DET DET Build Thread 89 E30 325is [sold & missed]
	Appreciate 0 Quote

11-16-2015, 11:18 AM	#8
_bdiddyb_ Lieutenant 215 Rep 558 Posts Drives: 2013 335i Join Date: Aug 2013 Location: California iTrader: (1)	stainless steel lines, sure - why not go all the way.
	Appreciate 0 Quote

11-20-2015, 08:43 AM	#11
leonmckee New Member 0 Rep 6 Posts Drives: 2016 328d xDrive Wagon Join Date: Jun 2015 Location: Bend, Oregon iTrader: (0)	There's also a $300 rebate right now (U.S.) if you purchase from a BMW dealer: http://bmwrebateoffers.com Leon McKee
	Appreciate 0 Quote

11-20-2015, 08:46 AM	#12
leonmckee New Member 0 Rep 6 Posts Drives: 2016 328d xDrive Wagon Join Date: Jun 2015 Location: Bend, Oregon iTrader: (0)	Also, make sure you check this post: http://f30.bimmerpost.com/forums/sho...72&postcount=7 Leon McKee
	Appreciate 0 Quote