IND | Fall Line Motorsports F8x M3/M4 Rear Camber Shim Kit

IND-Distribution · 07-08-2015, 05:25 PM

When setting an M3 or M4 for high performance driving, properly setting the rear camber and toe will yield significant results. The rigidly mounted rear subframe and relatively low count of rubber bushings in the back of the car means that alignment changes translate very directly into the car’s behavior, and can be felt immediately when a change is made. The factory eccentric suspension bolts have a reasonable amount of adjustment range for a variety of ride heights and possible alignment settings, but are not a perfect solution.

The rigid camber shims will allow a technician to precisely set camber by choosing one of 5 shim offsets to install in the rear suspension. The shims can be used in either the normal orientation, or flipped, resulting in 9 different positions, divided into 1mm increments. This will give an exact camber setting, and ensures absolutely no change in alignment even in the harshest driving conditions.

Fall Line Motorsports F8x M3/M4 Rear Camber Shim Kit $165

Please contact IND by phone or email for more information or to place your order.
866.963.4520 | info@ind-distribution.com

The Fall Line Motorsports F8x M3/M4 Rear Camber Shim Kit may be viewed here in our online store: https://ind-distribution.com/product?sku=FLM-F8X-1BSHM

ashmostro · 10-15-2016, 12:46 PM

Would this shim kit allow for negative camber *beyond* the max factory adjustment available?

I have your adjustable rear toe arm but at the ride height of my eibach springs, I can only get - 1.8 degrees negative camber in the rear. I'd like more.

Thanks!

IND-Distribution · 10-17-2016, 12:23 PM

Quote:

Originally Posted by ashmostro

Would this shim kit allow for negative camber *beyond* the max factory adjustment available?

I have your adjustable rear toe arm but at the ride height of my eibach springs, I can only get - 1.8 degrees negative camber in the rear. I'd like more.

Thanks!

The shim kit does not enable adjustment beyond the normal range- the slot in the suspension allows the same amount of travel, so you're limited by what BMW has given you, in that respect.

The camber shim kit is intended to provide very rapid alignment changes, and also to maintain exactly consistent camber settings. Eccentric adjusters will slip under high cornering loads (especially with modified suspension and high performance tires), and the car's behavior can become very difficult to predict as a result. Using camber shims for adjustment eliminates that issue.

ashmostro · 10-18-2016, 11:37 PM

Thank you!

YMB-M3-J2 · 04-08-2017, 11:30 AM

I have a question on these. I'm lowered on Eibachs and now of course have inner tire wear and am just looking for something that will allow me to get them back square like OEM. I'm not looking for aggressive tracks settings or anything like that. Will these do just that?

IND-Distribution · 04-10-2017, 04:40 PM

Quote:

Originally Posted by YMB_M4_j2

I have a question on these. I'm lowered on Eibachs and now of course have inner tire wear and am just looking for something that will allow me to get them back square like OEM. I'm not looking for aggressive tracks settings or anything like that. Will these do just that?

Yup! Exactly what they're for.

YMB-M3-J2 · 04-12-2017, 09:53 AM

Quote:

Originally Posted by Cat@IND

Quote:

Originally Posted by YMB_M4_j2

I have a question on these. I'm lowered on Eibachs and now of course have inner tire wear and am just looking for something that will allow me to get them back square like OEM. I'm not looking for aggressive tracks settings or anything like that. Will these do just that?

Yup! Exactly what they're for.

Thank you!

Nate@IND · 04-26-2017, 12:36 PM

Install guide is now live on the new iND site

https://ind-distribution.com/product?sku=FLM-F8X-1BSHM

M4 CSL · 09-02-2017, 06:26 PM

I would like these. I am fine with the $165 USD price, but they want a further $250 USD to ship them.

IND-Distribution · 09-07-2017, 06:30 PM

Quote:

Originally Posted by M4 CSL

I would like these. I am fine with the $165 USD price, but they want a further $250 USD to ship them.

I'll be more than happy to provide a custom shipping quote for you!

PM sent

M4 CSL · 09-07-2017, 10:27 PM

Quote:

Originally Posted by Cat@IND

I'll be more than happy to provide a custom shipping quote for you!

PM sent

Thanks CAT, I ordered them online. But you will need to add the price you quoted me for shipping. Thanks.

IND-Distribution · 09-08-2017, 11:28 AM

Quote:

Originally Posted by M4 CSL

Thanks CAT, I ordered them online. But you will need to add the price you quoted me for shipping. Thanks.

Email sent, thank you!

07-08-2015, 05:25 PM	#1
IND-Distribution BimmerPost Supporting Vendor 9571 Rep 10,852 Posts Drives: G82 M4 / G87 M2 Join Date: Oct 2006 Location: Chicago iTrader: (3)	IND \| Fall Line Motorsports F8x M3/M4 Rear Camber Shim Kit When setting an M3 or M4 for high performance driving, properly setting the rear camber and toe will yield significant results. The rigidly mounted rear subframe and relatively low count of rubber bushings in the back of the car means that alignment changes translate very directly into the car’s behavior, and can be felt immediately when a change is made. The factory eccentric suspension bolts have a reasonable amount of adjustment range for a variety of ride heights and possible alignment settings, but are not a perfect solution. The rigid camber shims will allow a technician to precisely set camber by choosing one of 5 shim offsets to install in the rear suspension. The shims can be used in either the normal orientation, or flipped, resulting in 9 different positions, divided into 1mm increments. This will give an exact camber setting, and ensures absolutely no change in alignment even in the harshest driving conditions. Fall Line Motorsports F8x M3/M4 Rear Camber Shim Kit $165 Please contact IND by phone or email for more information or to place your order. 866.963.4520 \| info@ind-distribution.com The Fall Line Motorsports F8x M3/M4 Rear Camber Shim Kit may be viewed here in our online store: https://ind-distribution.com/product?sku=FLM-F8X-1BSHM __________________ IND DISTRIBUTION \| 866-963-4520 • INSTAGRAM • YOUTUBE • FACEBOOK • FLICKR Last edited by IND-Distribution; 06-26-2017 at 10:46 AM..
	Appreciate 0 Tweet Quote

10-15-2016, 12:46 PM	#2
ashmostro Brigadier General 1251 Rep 4,087 Posts Drives: 2020 M4cs \| 2022 M550i Join Date: Jan 2013 Location: Falls Church, VA iTrader: (27)	Would this shim kit allow for negative camber beyond the max factory adjustment available? I have your adjustable rear toe arm but at the ride height of my eibach springs, I can only get - 1.8 degrees negative camber in the rear. I'd like more. Thanks!
	Appreciate 0 Quote

10-18-2016, 11:37 PM	#4
ashmostro Brigadier General 1251 Rep 4,087 Posts Drives: 2020 M4cs \| 2022 M550i Join Date: Jan 2013 Location: Falls Church, VA iTrader: (27)	Thank you!
	Appreciate 1 Quote

04-08-2017, 11:30 AM	#5
YMB-M3-J2 Major 258 Rep 1,309 Posts Drives: YMB M3 Join Date: Jan 2010 Location: South Florida iTrader: (0) Garage List 2016 BMW X6M [0.00] 2018 BMW M3 [0.00] 2015 BMW X4 35i [0.00] 2015 BMW M4 (SOLD) [0.00] 2012 BMW 328i SL(SOLD) [0.00] 2008 BMW 328i (SOLD) [0.00] 2007 C230 Komp (SOLD) [0.00] 1999 BMW 328i (SOLD) [0.00]	I have a question on these. I'm lowered on Eibachs and now of course have inner tire wear and am just looking for something that will allow me to get them back square like OEM. I'm not looking for aggressive tracks settings or anything like that. Will these do just that?
	Appreciate 0 Quote

04-26-2017, 12:36 PM	#8
Nate@IND BimmerPost Supporting Vendor 2865 Rep 11,374 Posts Drives: BMW Join Date: Oct 2006 Location: Chicago iTrader: (19)	Install guide is now live on the new iND site https://ind-distribution.com/product?sku=FLM-F8X-1BSHM __________________ IND DISTRIBUTION \| 866-963-4520 • FACEBOOK • INSTAGRAM • FLICKR
	Appreciate 0 Quote

09-02-2017, 06:26 PM	#9
M4 CSL Captain 231 Rep 656 Posts Drives: ///M4 Join Date: Aug 2015 Location: Australia iTrader: (0)	I would like these. I am fine with the $165 USD price, but they want a further $250 USD to ship them. __________________ ///M4 \| AKRA Evo & DP's \| Brembo GT BBK \| MSR CAI & CP's \| MPSC2 \| Suspension : \| KW CS 3-way \| Dinan Toe Links \| GC ARWJ & End links \| IND Shims \| SPL Control arms & End links \| aFe Bars \|
	Appreciate 1 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search