[daixloxbmw]

Hi all,

I recently installed a catless DP to my 135i, which is entirely stock except for the Procede Rev3 V5 tune. A day after the catless DP was installed, the SES light appeared. Will the Procede's CanClear feature auto-remove the SES light that was triggered by the catless DP? I had the Procede installed over 2 years ago and I don't remember if CanClear was enabled. I didn't change any settings so what is the default setting for CanClear?

Patiently waiting for kevBquick and ****** to finish developing the N55 DP Fix...

Thanks!

[kalthuss]

No worries. Mine got JB4 and kittyless Dp as well. The sea light usually came on when I rev over 4K-5k. Sometimes on freeway, the light suddenly pops on when cruising around 2k rpm. Every time I clear the code, the light pops on again days after. No effect to performance at all.

[Johnny Boost]

No one uses the Procede for the N55. Dump it and get a jb4 or Cobb.

[Mike@N54Tuning.com]

Originally Posted by Johnny Boost

No one uses the Procede for the N55. Dump it and get a jb4 or Cobb.

There are still a few out there but you are right its pretty much not supported, but if the OP is happy with it no reason to switch as I think they have pretty much ZERO resale value these days.

Mike

[daixloxbmw]

Originally Posted by Mike@N54Tuning.com

There are still a few out there but you are right its pretty much not supported, but if the OP is happy with it no reason to switch as I think they have pretty much ZERO resale value these days.

Mike

I understand that it isn't supported anymore but I've had Procede since 2008 back on my N54 335i when they were the only tune option, before JB and Cobb were available. Since I was already familiar and satisfied with Procede, I went with them again in 2010 when I got my N55 135i. I've never had any issues with it so there is no reason to switch tunes now.

If anyone has any insight on how to suppress the SES light that was triggered by the catless DP, I would appreciate it.

Thanks!

[around]

Originally Posted by daixloxbmw

If anyone has any insight on how to suppress the SES light that was triggered by the catless DP, I would appreciate it.

Thanks!

just in case you haven't heard......they did it !!!!!

[jwalker87]

Check out the recent posts on this thread: http://www.e90post.com/forums/showthread.php?t=1111773

And this one: http://www.e90post.com/forums/showthread.php?t=1087036

No more light clearing needed. Install the Cat-Simulator and the car will think it still has a cat.

[kevBquick]

Originally Posted by daixloxbmw

Hi all,



Patiently waiting for kevBquick and ****** to finish developing the N55 DP Fix...

Thanks!

your good to go my friend...