335i OEM Brembo on 328i retrofit

Project Elite · 12-27-2015, 03:36 PM

Has anyone successfully done this? What is required for this to be a smooth bolt on installation? Is coding necessary?

HP Autosport · 12-29-2015, 07:45 PM

Don't see why not. We have installed these successfully on E90's.

QUiKSR20 · 12-29-2015, 10:39 PM

Im looking to do this too and have the standard 328i brakes.. I have heard coding is necessary to get the correct bias.. So do all F30's use the same Master Cylinder and its just coding to the right brake package to get the correct pedal correctness?

Can we just upgrade the front to 335 spec and leave the stock rears?

jrortiz · 12-30-2015, 08:22 AM

Quote:

Originally Posted by Project Elite

Has anyone successfully done this? What is required for this to be a smooth bolt on installation? Is coding necessary?

Here that the rear are not the same size and that the hand break wont fit since the 335 are bigger. Front shouldn't have any problem.

Project Elite · 12-30-2015, 03:55 PM

Quote:

Originally Posted by jrortiz

Here that the rear are not the same size and that the hand break wont fit since the 335 are bigger. Front shouldn't have any problem.

You are correct. Coding is not necessary but can be done for peace of mind.

12-27-2015, 03:36 PM	#1
Project Elite Captain 137 Rep 647 Posts Drives: F30 Join Date: Sep 2015 Location: Bay Area iTrader: (1)	335i OEM Brembo on 328i retrofit Has anyone successfully done this? What is required for this to be a smooth bolt on installation? Is coding necessary?
	Appreciate 0 Tweet Quote

12-29-2015, 07:45 PM	#2
HP Autosport Supreme Allied Commander 3842 Rep 54,353 Posts Drives: F80 M3 Join Date: Mar 2007 Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com iTrader: (36)	Don't see why not. We have installed these successfully on E90's.
	Appreciate 0 Quote

12-29-2015, 10:39 PM	#3
QUiKSR20 Major 362 Rep 1,407 Posts Drives: 13' F30 328i 6MT Join Date: Mar 2012 Location: NJ iTrader: (17) Garage List 2013 BMW 328i Sport [10.00] 92 Sentra SE-R Turb ... [0.00]	Im looking to do this too and have the standard 328i brakes.. I have heard coding is necessary to get the correct bias.. So do all F30's use the same Master Cylinder and its just coding to the right brake package to get the correct pedal correctness? Can we just upgrade the front to 335 spec and leave the stock rears? __________________ '13 F30 328i Sport 6MT \| '18 G01 X3 xDrive30i \| '95 E36 325i Vert 5MT 92 Sentra SE-R SR20DET DET Build Thread 89 E30 325is [sold & missed]
	Appreciate 0 Quote