Do you think e92 zcp wheels will fit the m2?

k-jay · 02-16-2016, 02:47 PM

Hi, there are a set of original e92 zcp wheels for sale and they are very rare on my side of the world. i would love to put this wheel on my m2 when it arrives but do you guys think they will fit?
m2 front= 19x9 et29 rear: 19x10 et25
e92 zcp= 19x9 et 31 rear: 19x10 et40

Front diff= 2mm in
rear diff= 15mm out

Icsunonove · 02-17-2016, 06:21 AM

M2 rear OEM is ET40

metrickid · 02-17-2016, 06:22 AM

Quote:

Originally Posted by Icsunonove

M2 rear OEM is ET40

It is quite obvious that he just switched the numbers in his text as his math is correct.

Icsunonove · 02-17-2016, 06:28 AM

I did not know that e92 ZCP are ET25, now I do, thank you.

OrangeCrush · 02-17-2016, 08:20 PM

The front is virtually identical so no problem there. The rear would be like throwing on 15mm spacers. Looking at the M2 it seems they would stick out a little. If you lowered the M2 and added some camber you might be fine.

This is all a guess based on pictures and I could be way off.

Denk · 02-17-2016, 11:05 PM

Very aggressive in the rear going with 359's. It could go either way, gotta get a measurement. They seem to work for the M3/M4 but a few mm's difference can make or break.

dmk08 · 02-25-2016, 02:02 PM

Quote:

Originally Posted by Denk

Very aggressive in the rear going with 359's. It could go either way, gotta get a measurement. They seem to work for the M3/M4 but a few mm's difference can make or break.

Yeah you can run 15-18mm spacers w/ 437M on the back of an M3/M4 but I'm guessing that will be too much on the M2. You can tell from stock pictures its way more aggressive stock.

k-jay · 03-09-2016, 07:03 AM

Thanks for all the replies, however last minute i switched my order to a Yas M4 competition pack 6mt, arrival late May.

dmk08 · 03-09-2016, 08:00 AM

Quote:

Originally Posted by k-jay

Thanks for all the replies, however last minute i switched my order to a Yas M4 competition pack 6mt, arrival late May.

Good call

Pol · 03-09-2016, 08:28 AM

Quote:

Originally Posted by Denk

Very aggressive in the rear going with 359's. It could go either way, gotta get a measurement. They seem to work for the M3/M4 but a few mm's difference can make or break.

If they fit, that would be also an option for me. Anyway, no spacers here. Legislation concerning is very severe in our country.

k-jay · 03-10-2016, 07:49 AM

Ya, avant garde m359 would probably be better fit and cheaper, Unfortunatley to get them here to South africa with postage and all custom taxes would of been too much. When i was getting the m2 the comp wheels/m359 were the only wheels i wanted, really think that those wheels with a drop will look awesome.

Yeineken · 04-14-2016, 05:04 PM

Hi. Got bored today.

Don't think there is a car these wheels don't look good on.

Benzima · 04-15-2016, 09:41 AM

I will most likely do a wheel swap with the 1M once I get my car.

M3 Adjuster · 04-30-2016, 03:58 PM

Quote:

Originally Posted by Yeineken

Hi. Got bored today.

Don't think there is a car these wheels don't look good on.

Are those E9x wheels that you bolted up. Cool!

Yeineken · 04-30-2016, 06:10 PM

Quote:

Originally Posted by M3 Adjuster

Quote:

Originally Posted by Yeineken

Hi. Got bored today.

Don't think there is a car these wheels don't look good on.

Are those E9x wheels that you bolted up. Cool!

Photoshop. They are the 1M/E9X ZCP wheels.

Advevo · 05-04-2016, 05:41 PM

Rears stick out i tested it!

cme · 05-05-2016, 02:21 PM

I think some guys have it backwards. The ET40 wheels will sit 15mm more in board and closer to the suspension. The higher the offset the further the mounting pad is from the center of the rim.

The E92 ZCP wheels should fit without a problem.

Chet

m3dragon · 10-20-2017, 12:12 PM

update

SubaruGuy · 10-22-2017, 07:33 PM

Tried it out, rears almost certainly will rub. Dang it looks good though..

fullsize album:

View post on imgur.com

stefan · 10-22-2017, 10:50 PM

Quote:

Originally Posted by SubaruGuy

Tried it out, rears almost certainly will rub. Dang it looks good though..

fullsize album:

View post on imgur.com

damn that's too bad. one of my favourite wheels.

m3dragon · 10-23-2017, 09:32 AM

Quote:

Originally Posted by SubaruGuy

Tried it out, rears almost certainly will rub. Dang it looks good though..

fullsize album:

View post on imgur.com

What is the offest difference between the M2 and GTS/1M wheels?

TampaF87 · 12-07-2017, 10:06 AM

That last pic makes me think that it's possible to get away with them and a little more negative camber. I'm interested because I have a potential line on a set of these. They are gorgeous for a factory wheel.

02-16-2016, 02:47 PM	#1
k-jay Enlisted Member 33 Rep 34 Posts Drives: M235i Join Date: Nov 2014 Location: South Africa iTrader: (0)	Do you think e92 zcp wheels will fit the m2? Hi, there are a set of original e92 zcp wheels for sale and they are very rare on my side of the world. i would love to put this wheel on my m2 when it arrives but do you guys think they will fit? m2 front= 19x9 et29 rear: 19x10 et25 e92 zcp= 19x9 et 31 rear: 19x10 et40 Front diff= 2mm in rear diff= 15mm out
	Appreciate 0 Tweet Quote

02-17-2016, 06:21 AM	#2
Icsunonove Enlisted Member 10 Rep 36 Posts Drives: M2 BSM Join Date: Sep 2009 Location: Argentina iTrader: (0)	M2 rear OEM is ET40
	Appreciate 0 Quote

02-17-2016, 06:28 AM	#4
Icsunonove Enlisted Member 10 Rep 36 Posts Drives: M2 BSM Join Date: Sep 2009 Location: Argentina iTrader: (0)	I did not know that e92 ZCP are ET25, now I do, thank you.
	Appreciate 0 Quote

02-17-2016, 08:20 PM	#5
OrangeCrush Lieutenant Colonel 1236 Rep 1,963 Posts Drives: VO 1M #513/740 Join Date: May 2012 Location: USA iTrader: (0)	The front is virtually identical so no problem there. The rear would be like throwing on 15mm spacers. Looking at the M2 it seems they would stick out a little. If you lowered the M2 and added some camber you might be fine. This is all a guess based on pictures and I could be way off.
	Appreciate 1 pawelczyk7139.00 Quote

02-17-2016, 11:05 PM	#6
Denk Brigadier General 1006 Rep 3,341 Posts Drives: 2021 X5M Join Date: May 2011 Location: PNW iTrader: (2)	Very aggressive in the rear going with 359's. It could go either way, gotta get a measurement. They seem to work for the M3/M4 but a few mm's difference can make or break.
	Appreciate 0 Quote

03-09-2016, 07:03 AM	#8
k-jay Enlisted Member 33 Rep 34 Posts Drives: M235i Join Date: Nov 2014 Location: South Africa iTrader: (0)	Thanks for all the replies, however last minute i switched my order to a Yas M4 competition pack 6mt, arrival late May.
	Appreciate 1 Quote

03-10-2016, 07:49 AM	#11
k-jay Enlisted Member 33 Rep 34 Posts Drives: M235i Join Date: Nov 2014 Location: South Africa iTrader: (0)	Ya, avant garde m359 would probably be better fit and cheaper, Unfortunatley to get them here to South africa with postage and all custom taxes would of been too much. When i was getting the m2 the comp wheels/m359 were the only wheels i wanted, really think that those wheels with a drop will look awesome.
	Appreciate 1 Quote

04-14-2016, 05:04 PM	#12
Yeineken Colonel 1299 Rep 2,093 Posts Drives: '11 135i M Sport Join Date: Dec 2013 Location: Delmarva Peninsula iTrader: (3) Garage List '11 135i [8.20] '16 Ford Hatchback [0.00] '15 X5 [10.00]	Hi. Got bored today. Don't think there is a car these wheels don't look good on. Attached Images __________________ Pyrat Clone
	Appreciate 6 ObsidianX130.00 ried791.50 Quote

04-15-2016, 09:41 AM	#13
Benzima Colonel 1324 Rep 2,924 Posts Drives: 2017 BMW M2 Join Date: Nov 2015 Location: Montreal, CANADA iTrader: (0)	I will most likely do a wheel swap with the 1M once I get my car. __________________ BMW ///M Club Montreal BMW ///M Club Montreal Facebook Page
	Appreciate 2 Rafstar90.00 Quote

05-04-2016, 05:41 PM	#16
Advevo Banned 581 Rep 1,170 Posts Drives: M2 Competition, E30 M3 DTM Join Date: Apr 2006 Location: Country where the taxes are too high!! iTrader: (0)	Rears stick out i tested it!
	Appreciate 0 Quote

05-05-2016, 02:21 PM	#17
cme Private First Class 229 Rep 159 Posts Drives: 22 M3 xD Comp Join Date: Nov 2008 Location: NY iTrader: (0)	I think some guys have it backwards. The ET40 wheels will sit 15mm more in board and closer to the suspension. The higher the offset the further the mounting pad is from the center of the rim. The E92 ZCP wheels should fit without a problem. Chet __________________ 72 2002tii \| 90 E30 M3 13 E92 M3 \| 16 F87 M2 20 F87 M2 CS 22 G80 M3 xD Comp
	Appreciate 0 Quote

10-20-2017, 12:12 PM	#18
m3dragon Colonel 178 Rep 2,051 Posts Drives: CSL M3 Join Date: Dec 2007 Location: Sacramento iTrader: (1)	update __________________ NorCal drive organizer guy NorCal CSL build thread - US to CSL Conversion
	Appreciate 0 Quote

10-22-2017, 07:33 PM	#19
SubaruGuy Registered 8 Rep 4 Posts Drives: 2018 LBB M2 Join Date: Oct 2017 Location: MN iTrader: (0)	Tried it out, rears almost certainly will rub. Dang it looks good though.. fullsize album: View post on imgur.com Last edited by SubaruGuy; 10-22-2017 at 11:01 PM..
	Appreciate 3 Benzima1324.00 ried791.50 bunnyhive55.50 Quote

12-07-2017, 10:06 AM	#22
TampaF87 Private First Class 85 Rep 105 Posts Drives: M2 Join Date: Jul 2017 Location: Tampa iTrader: (0)	That last pic makes me think that it's possible to get away with them and a little more negative camber. I'm interested because I have a potential line on a set of these. They are gorgeous for a factory wheel.
	Appreciate 0 Quote