ETS lower chargepipe fitment issues

GoCougs · 03-24-2016, 07:27 AM

Hello,

I installed an ETS 5" IC, the ETS lower CP, and ER CP last weekend. I wanted the ER CP because it allows for use of the stock mounting bracket but when I put in the ETS lower CP it only fit after some finagling. I really had to force it onto the IC as low as it would go and then it barely fit against the ER CP at an awkward angle. Luckily I was still able to get the hosing connected in a way that allowed it to hold boost. Have you guys noticed fitment issues with the lower charge pipe as well? Has anybody got OEM-like fitment using an aftermarket lower CP?

If needed, I can post a picture later when I'm off work.

Dhillon92 · 03-24-2016, 08:39 AM

I can't comment directly on the ETS lower cp, but I have the vrsf lower cp that came with my IC, and an ER cp. They both mate fine, the ER mounting hole lines up but just barely enough for the bolt to go through.

Maybe you can try with a longer coupler that may allow some more slack?

mike@x-ph.com · 03-24-2016, 01:57 PM

Post pics or better yet send these pics to ETS

03-24-2016, 07:27 AM	#1
GoCougs Private 2 Rep 50 Posts Drives: 2011 335xi Join Date: Aug 2015 Location: Seattle, WA iTrader: (0)	ETS lower chargepipe fitment issues Hello, I installed an ETS 5" IC, the ETS lower CP, and ER CP last weekend. I wanted the ER CP because it allows for use of the stock mounting bracket but when I put in the ETS lower CP it only fit after some finagling. I really had to force it onto the IC as low as it would go and then it barely fit against the ER CP at an awkward angle. Luckily I was still able to get the hosing connected in a way that allowed it to hold boost. Have you guys noticed fitment issues with the lower charge pipe as well? Has anybody got OEM-like fitment using an aftermarket lower CP? If needed, I can post a picture later when I'm off work.
	Appreciate 0 Tweet Quote

03-24-2016, 08:39 AM	#2
Dhillon92 Captain 82 Rep 604 Posts Drives: '11 335xi Join Date: Jul 2014 Location: Toronto iTrader: (0)	I can't comment directly on the ETS lower cp, but I have the vrsf lower cp that came with my IC, and an ER cp. They both mate fine, the ER mounting hole lines up but just barely enough for the bolt to go through. Maybe you can try with a longer coupler that may allow some more slack?
	Appreciate 0 Quote

03-24-2016, 01:57 PM	#3
mike@x-ph.com BimmerPost Supporting Vendor 24199 Rep 190,807 Posts Drives: 07-335/12-328/18-M4/21-M4CP Join Date: Sep 2013 Location: Las Vegas iTrader: (23)	Post pics or better yet send these pics to ETS __________________ Check out our current sale by clicking on this link! https://x-ph.com/sale/ Phone number 702-494-9435
	Appreciate 0 Quote