[NeT335]

As title states I'm looking for 12mm spacers

If anyone wants to sell theirs let me know please

Thanks

[NeT335]

All good I bought new ones

[EB89]

Are they for the front or back?

I have 12mm on the front and it scrub a dub dubs

[NeT335]

Originally Posted by EB89

Are they for the front or back?

I have 12mm on the front and it scrub a dub dubs

For the back

I have 10mm on the back now but going to put them on the front and these 12mm on the back

Is the rubbing bad? Or just every now and then over bumps

[EB89]

Originally Posted by GeTiNQ

For the back

I have 10mm on the back now but going to put them on the front and these 12mm on the back

Is the rubbing bad? Or just every now and then over bumps

Rears are 18 and they rub like crazy, had the renders rolled, I need to get them cut.

Front don't rub on bumps, only when turning the wheel

[NeT335]

Originally Posted by EB89

Rears are 18 and they run like crazy, had the renders rolled, I need to get them cut.

Front don't rub on bumps, only when turning the wheel

Ohk see how I go if I get too much rubbing I might swap these for either another set of 10mm or 8mm

[EB89]

You might be ok with the smaller size.

[froop]

Originally Posted by GeTiNQ

Ohk see how I go if I get too much rubbing I might swap these for either another set of 10mm or 8mm

You can't go 8mm without it no longer being properly hub centric, so generally not recommended. Usually it's 3-5mm, and then jumps to 10+. That's because our hubs have maybe a 10mm lip on it.