[PDU]

Hey guys,

(Updated 4/30/16)
I've updated the original post since I've received a few PM's asking about a potential GB.

Our F22 front & side lip extensions will be available in either 2x2 Carbon Fiber (CFRP/Vacuum Infused/UV coated) or unpainted FRP, both options ensure a lightweight yet durable finish.

If you want to participate in the GB send an email to sales@performancedesignunlimited.

Min 5 = 5% Discount
6-9 = 10% Discount
10+ = 15% Discount

In order for a group discount to be in effect a minimum of 5 orders must be reached.

Once the minimum 5 people commit to purchase they will receive PayPal invoices that reflect the current discount percentage. Anything above 5 orders and everyone participating receives a healthy 10% discount. 10+ orders and everyone receives an even better 15% discount.

GB orders must be locked in by 11:59 pm on 15 May. Shipping for this GB order begins 15 June.

If you received a 5% discount and we end at the 10% or 15% discount rate you will be refunded the difference via PayPal.

If you have any questions please don't hesitate to ask.

Email: sales@performancedesignunlimited.com















FRP Front Spoiler/Side extensions color matched Alpine White.








No updated pics right now since the car is getting ready for BimmerFest, we'll update this thread as soon as we do though. Make sure you stop by booth #44 and say hi if your attending!

[BD_F22]

Any installed pics on the front lip?

[PDU]

Not quite yet but we will as soon as we get our new wheel set up on the car.

[CanadianGatorBacon]

Thank you for not offering more options than just CF parts.

[tenfour]

Originally Posted by CanadianGatorBacon

Thank you for not offering more options than just CF parts.

Not sure if you are being sarcastic, but the site gives you a choice of cf and frp.

[CanadianGatorBacon]

Originally Posted by tenfour

Not sure if you are being sarcastic, but the site gives you a choice of cf and frp.

Ya, that's what OP said in the first post. Too many aftermarket manufacturers only make cf parts that cost more than many of us would like, forcing us to resort to poor quality knockoffs (and then some of them get mad about people buying the knockoffs). There are lots of posts on this forum by people looking for non-cf alternatives. I personally do not want cf parts. It's not the look or price point I want. And I don't want to buy cf just to paint it. The non-cf options are severely limited.

[robman23]

Great looking products. Your "About Us" section of your web site is excellent. I'm interested in your CF front lip. Let me know when you have a couple of pictures of it installed.

[CanadianGatorBacon]

Any plans for other f22 parts? Diffuser? Spoiler?

Originally Posted by robman23

I'm interested in your CF front lip. Let me know when you have a couple of pictures of it installed.

http://www.performancedesignunlimite...media-horizon/
http://www.2addicts.com/forums/showthread.php?t=987154
http://www.2addicts.com/forums/showthread.php?t=1214097

[PDU]

[QUOTE=CanadianGatorBacon;19820736]Any plans for other f22 parts? Diffuser? Spoiler?


Not at the moment.

If there's enough interest I can set up a GB for anyone interested btw.

[robman23]

I'm thinking of the CF front lip looks awesome. I have a stock F22 (suspension). I currently rub a little coming out of my drive way. How much of a drop would this add?

[PDU]

Originally Posted by robman23

I'm thinking of the CF front lip looks awesome. I have a stock F22 (suspension). I currently rub a little coming out of my drive way. How much of a drop would this add?

Thanks!

If riding on stock suspension it's not too bad, minimal for the design.

If I remember correctly the M Performance has a small add on lip that attaches to the main lip on the bottom, vertically from the ground up it adds less drop than that however the lip extends out a bit further.

[BD_F22]

Originally Posted by PDU

Thanks!

If riding on stock suspension it's not too bad, minimal for the design.

If I remember correctly the M Performance has a small add on lip that attaches to the main lip on the bottom, vertically from the ground up it adds less drop than that however the lip extends out a bit further.

I am actually dealing with this right now.. I had the 3D design style front lip and clearance was perfect aside from slight scraping in and out of certain driveways however I decided to switch it up for the M performance style CF lip and couldn't even get out of my driveway with it. Will your lip offer similar clearance to the 3D design?

[PDU]

Originally Posted by BD_F22

I am actually dealing with this right now.. I had the 3D design style front lip and clearance was perfect aside from slight scraping in and out of certain driveways however I decided to switch it up for the M performance style CF lip and couldn't even get out of my driveway with it. Will your lip offer similar clearance to the 3D design?

When I ran the M Perf that small lip snagged something one day and tore the plastic under panel it attached to clean off

To answer your question, yes it would be similar clearance.

[PDU]

Up for GB info added in post #1.

[BD_F22]

I have one other question.. Are these pre-drilled to utilize the factory bolts undearneath?

[PDU]

Yes they are.

[cmiller219]

any updates on Group Buy? how many are in? Still going on?

[Saab Story]

Originally Posted by cmiller219

any updates on Group Buy? how many are in? Still going on?

Based on the first post it ended May 15.

Wish I had seen this sooner; I would've been up for the front lip GB.