[bmwheath]

Hey guys. Where is the N20 TMAP option within the MHD app? Cant seem to find it anywhere

[Socket]

Isn't it a check option you have to select before loading map? With the options for cold start and linear pedal? When I didn't select the Tmap option the car ran super rough and was almost undrivable

[bmwheath]

Originally Posted by Socket

Isn't it a check option you have to select before loading map? With the options for cold start and linear pedal? When I didn't select the Tmap option the car ran super rough and was almost undrivable

Did you load a off the shelf map or custom map? I have only flashed custom maps and there is no option for TMAP, cold start, linear pedal etc??? Maybe there is some difference there?

[Socket]

Not sure had been a while since I flashed s new map but from memory you select the map (OTS or custom) and the next menu is the one with the check button options before the map will start flashing

How are you selecting and loading your map? Through the MHD app menu? Can you describe the steps?

[bmwheath]

Originally Posted by Socket

Not sure had been a while since I flashed s new map but from memory you select the map (OTS or custom) and the next menu is the one with the check button options before the map will start flashing

How are you selecting and loading your map? Through the MHD app menu? Can you describe the steps?

Hmm.. Well while im in MHD app i go into "flash a custom map", select the custom file i wont, it gives me a write time of like 1-2mins and then its done.
Ill have to check it out again tomorrow, but from memory there are no other options at all

[bmwheath]

Originally Posted by Socket

Isn't it a check option you have to select before loading map? With the options for cold start and linear pedal? When I didn't select the Tmap option the car ran super rough and was almost undrivable

Are you MHD only Socket??

[Socket]

No mate I'm MHD stacked with JB4
Weird there is definitely a option menu mate. If you haven't sorted it out I'll check it on the weekend when I get my car back. Sorry I can't be of more help

[7smurfs]

MHD only should be that you set the option prior to flashing

[bmwheath]

UPDATE: Thank you guys, yes there is an options menu right before flashing. I was so frantically caught up in pulling my whole car apart yesterday that i overlooked the options menu. Unfortunately nothing from this menu helped with my issues im having, so i am now ready to burn this car to the ground lol

[Brule]

What's up with your car?

[Socket]

Originally Posted by Brule

What's up with your car?

Yeh what's up with ur car bra?

[Coupes33]

Originally Posted by bmwheath

UPDATE: Thank you guys, yes there is an options menu right before flashing. I was so frantically caught up in pulling my whole car apart yesterday that i overlooked the options menu. Unfortunately nothing from this menu helped with my issues im having, so i am now ready to burn this car to the ground lol

Don't do that Heath. We want to see you at Willowbank pulling low 11s. When did your issues start? Was it when you changed the TMAP sensor or before that? Does it idle ok or is it rough?

[bmwheath]

Guys, its the typical 335i thing, its like the little stone from David's sling can take down Goliath. Its always 1 stupid little thing that renders these cars useless.
Im getting 4 fault codes that look to be pointing towards the intake manifold sensor. I have changed it and no luck, ive changed out 2 different TMAP sensor, removed & re fitted every freakin bolt on part in the car, removed JB4, updated, held my left hand above my head while right hand on my nose, shuffled to the left, shuffled to the right, blinked 3 times while singing the Macarena, and still no good

[bmwheath]

Originally Posted by Brule

What's up with your car?

Im pressing the accelerator pedal 100% but only getting 30-40% throttle blade opening according to the logs. It triggers all these fault codes:
Fault codes:
2D2E - Angle of throttle valve-intake pipe under pressure - correlation
2ABD - intake pressure sensor - re running
30FE - boost over target
3100 - low boost mode engaged -- CEL displayed

I have tried 2 map sensors, 2 intake manifold sensors. I have even completely disassembled the throttle body gears & motor and all appeared to be in top shape & not jamming up.

[DR-JEKL]

Originally Posted by bmwheath

Guys, its the typical 335i thing, its like the little stone from David's sling can take down Goliath. Its always 1 stupid little thing that renders these cars useless.
Im getting 4 fault codes that look to be pointing towards the intake manifold sensor. I have changed it and no luck, ive changed out 2 different TMAP sensor, removed & re fitted every freakin bolt on part in the car, removed JB4, updated, held my left hand above my head while right hand on my nose, shuffled to the left, shuffled to the right, blinked 3 times while singing the Macarena, and still no good

Hmm I think I was reading something similiar on a thread in the N54 forum last week.

Do you have the same issues?

http://www.n54tech.com/forums/showthread.php?t=37354

[bmwheath]

Originally Posted by DR-JEKL

Hmm I think I was reading something similiar on a thread in the N54 forum last week.

Do you have the same issues?

http://www.n54tech.com/forums/showthread.php?t=37354

Thanks for the link mate. He is getting different codes than me, but similar. I have googled the shit out of my fault codes, everyone seems to have a different opinion of what went wrong and how to fix it

[mojobmw_e90]

What voltage are u reading on the throttle body sensor when u floor the gas pedal?

[bmwheath]

Originally Posted by mojobmw_e90

What voltage are u reading on the throttle body sensor when u floor the gas pedal?

Hi mate. If your referring to the N20 TMAP sensor, in my log it is recorded as 2, so i assume 2 volts. Now thats on map4!
What voltage should the sensor be reading at WOT on another map?
Trebila is doing my tune so he should be all over this as he has all the logs

[Socket]

Originally Posted by bmwheath

Guys, its the typical 335i thing, its like the little stone from David's sling can take down Goliath. Its always 1 stupid little thing that renders these cars useless.
Im getting 4 fault codes that look to be pointing towards the intake manifold sensor. I have changed it and no luck, ive changed out 2 different TMAP sensor, removed & re fitted every freakin bolt on part in the car, removed JB4, updated, held my left hand above my head while right hand on my nose, shuffled to the left, shuffled to the right, blinked 3 times while singing the Macarena, and still no good

That's the problem you need to do the chicken dance not the macarena

[CashedUpBogan]

my random guess (which is as accurate as any way to diagnose these POSs sometimes) is boost solenoids

[bmwheath]

Originally Posted by CashedUpBogan

my random guess (which is as accurate as any way to diagnose these POSs sometimes) is boost solenoids

Thanks for your wild guess Cashy
You got 1 thing right though, these cars are ridiculously shit as f*#k! My wife hates it more than me, and i hate it alot!

[Socket]

Originally Posted by bmwheath

Thanks for your wild guess Cashy
You got 1 thing right though, these cars are ridiculously shit as f*#k! My wife hates it more than me, and i hate it alot!

No ya don't Heathy, when it's running right you love i. Think of it like a hot scitzo gf lel