[46m3csl]

Whats reasonable labor for motor mounts on a e90 335, or even something similar you guys have paid for your e90s or e92?

[Karman]

Bump

[Volasko]

Not the easiest of jobs as the shop will have to lift the engine to remove and install. I did my mounts when I did my oil pan gasket as it was a perfect time. If JUST doing the mounts I would expect a good shop could do this in about 2 hours.

[avocet]

Yup the n52 is easy to change out the mounts. I did mine in under two hours I bet under jack stands.

From what I understand though, is that with the n54/55 you will need to remove the right engine mount support to clear the downpipes or remove the actual downpipe..

This will give you an idea of what is required:

http://www.n54tech.com/forums/showthread.php?t=22841

[46m3csl]

So far best I have found is $275 from indy

[shirtpants_]

Originally Posted by 46m3csl

So far best I have found is $275 from indy

If theyll do it for 275, id take it in a heartbeat. Took me all day to do mine (335i) with an engine support bar ($80 at least) under jackstands with trial and error. Huge PITA...

[46m3csl]

Originally Posted by shirtpants_

If theyll do it for 275, id take it in a heartbeat. Took me all day to do mine (335i) with an engine support bar ($80 at least) under jackstands with trial and error. Huge PITA...

Jackstands wow, I ll take your word!!