|
|
|
KEEP M3POST ALIVE BY DOING YOUR TIRERACK SHOPPING FROM THIS BANNER LINK! |
Post Reply |
|
Thread Tools | Search this Thread |
04-02-2008, 05:41 PM | #1 |
#thatsanicemovebro
198
Rep 3,920
Posts
Drives: E92 M3 LSB/Black 6MT
Join Date: Mar 2007
Location: Montreal, Canada
|
I HATE THIS! (wheel question please... - Sale Reps please chime in)
I have been going nuts the past few days trying to find a good wheel. I want the following:
- Die-Forged (Impression-forged) - not machined out of a forged billet. - Gunmetal/Black - Clears a 380mm Brembo BBK W/O SPACERS - Is a reputable brand - Is not atrocious - 19'' - 20-23 lbs Lets run down the options shall we: BBS - Die-Forged - YES - Gunmetal/Black - DOESNT MATTER - Clears a 380 BBK W/O SPACERS - NO!!! (RG-R/RS-GT/LM-R) - Is a reputable brand - YES - Is not atrocious - YES - 19'' - YES - 20-23 lbs - YES Neez - Die-Forged - NO!! (I learned this recently) - Gunmetal/Black - YES - Clears a 380 BBK W/O SPACERS - I BELIEVE SO - Is a reputable brand - YES - Is not atrocious - YES - 19'' - YES - 20-23 lbs - YES RAC - Die-Forged - YES - Gunmetal/Black - WHO CARES - Clears a 380 BBK W/O SPACERS - I BELIEVE SO - Is a reputable brand - YES - Is not atrocious - YES - 19'' - YES - 20-23 lbs - DEPENDS - Is readily available for the E92 M3 w/out group buys - NO OZ - Die-Forged - NO (and those that are are not fully) - Gunmetal/Black - YES - Clears a 380 BBK W/O SPACERS - PROBABLY - Is a reputable brand - YES - Is not atrocious - SOME! - 19'' - YES - 20-23 lbs - NOT THE PARTIALLY FORGED ONES Volk - Die-Forged - YES - Gunmetal/Black - WHATEVER - Clears a 380 BBK W/O SPACERS - I DO THINK SO - Is a reputable brand - YES - Is not atrocious - NO!! (too ricey) - 19'' - YES - 20-23 lbs - YES MORR - Die-Forged - NO - Gunmetal/Black - YES - Clears a 380 BBK W/O SPACERS - I BELIEVE SO - Is a reputable brand - NOT YET (Notice I say not yet) - Is not atrocious - YES - 19'' - YES - 20-23 lbs - YES (Carlos, I'm telling you, I've heard good and bad things, but I mean, if your VS10 looks great and you get your certs and I learn a little more about your manufacturing process, I may just have to go with that! - Please, LESS spokes) Is there anything else!! Preferable 1-piece! Also in 19x8.5/19x10 P.S. Yes, I know I sound like a God-damned idiot 2 yr old, but one must understand that, roflmao, every idea I get is somehow shot down by one of those criteria! P.P.S. Do not make this into a flame-fest. Last edited by GewoW; 04-02-2008 at 08:36 PM.. |
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|