PROcede v3 clarification

ohsnapITZe92 · 04-16-2008, 04:25 PM

so ive just finished reading not even half of shiv's thread (pages and pages in less than a day...) on the new v3 and was somewhat confused.

from what i have read and understood if we are currently running v2 we can upgrade to v3 with extra wires and ect. for a small price upgrade.

but if we are not currently running v2 we can buy v3 as a PLUG AND PLAY?

and if we are going to upgrade from a v2 to a v3... do we need a laptop for the upgraded software?

Icyhot85 · 04-16-2008, 04:28 PM

i think yes it will be plug and play as long as you have a standard procede vishnu 1.4 system

ohsnapITZe92 · 04-16-2008, 04:46 PM

oh ok so the PNP isnt going to be exactly like a PNP like the SSTT then

OpenFlash · 04-16-2008, 05:08 PM

v2.1 was an internal designation that was used only with beta testers. It will not exist in general When v3 is available, it can be had in either a plug-in kit (harness+PROcede) or as an inexpensive update kit for those who already have a v1 or v2 PROcede. This update kit consists of a few additional wire looms and an o2 sim harness. Functionally, it is 100% identical to the plug-in version.

We will eventually offer the plug-in harness as an a la carte item. But this can only happen once we get further along into the manufacturing cycle.

I hope this clears things up

Shiv

ohsnapITZe92 · 04-16-2008, 05:14 PM

Quote:

Originally Posted by shiv@vishnu

v2.1 was an internal designation that was used only with beta testers. It will not exist in general When v3 is available, it can be had in either a plug-in kit (harness+PROcede) or as an inexpensive update kit for those who already have a v1 or v2 PROcede. This update kit consists of a few additional wire looms and an o2 sim harness. Functionally, it is 100% identical to the plug-in version.

We will eventually offer the plug-in harness as an a la carte item. But this can only happen once we get further along into the manufacturing cycle.

I hope this clears things up

Shiv

thanx shiv!

i will be looking forward to upgrading v2 to v3!

jdink · 04-16-2008, 05:59 PM

Quote:

Originally Posted by shiv@vishnu

v2.1 was an internal designation that was used only with beta testers. It will not exist in general When v3 is available, it can be had in either a plug-in kit (harness+PROcede) or as an inexpensive update kit for those who already have a v1 or v2 PROcede. This update kit consists of a few additional wire looms and an o2 sim harness. Functionally, it is 100% identical to the plug-in version.

We will eventually offer the plug-in harness as an a la carte item. But this can only happen once we get further along into the manufacturing cycle.

I hope this clears things up

Shiv

can i also get a large chocolate milk shake and onion rings?

sflgator · 04-16-2008, 07:12 PM

Quote:

Originally Posted by shiv@vishnu

v2.1 was an internal designation that was used only with beta testers. It will not exist in general When v3 is available, it can be had in either a plug-in kit (harness+PROcede) or as an inexpensive update kit for those who already have a v1 or v2 PROcede. This update kit consists of a few additional wire looms and an o2 sim harness. Functionally, it is 100% identical to the plug-in version.

We will eventually offer the plug-in harness as an a la carte item. But this can only happen once we get further along into the manufacturing cycle.

I hope this clears things up

Shiv

Ok, then I want my v3 (v2.1 with the extra few wire thingy)!!!!!

Thanks for the clarification; we've been getting a lot of differing interpretations as to what you will be offering in v3. I think I'll start off clean with the PnP v3 when I get another 335i in ~ 12 months!!!

Mr_T · 04-16-2008, 10:09 PM

Shiv,

I'm sure you may have this in the works. I was wondering if you can possibly explain in somewhat simple terms:

1) High level improvements/benefits V3 has over V2.x on a stock 335i
2) Which Mods (DPs, Exhaust, Intakes - CAI, HVI, FMIC....etc) take further advantage which improvements, and if possible how.

I think this would help some of us understand a bit more of what is being offered in V3 and how we can mod to make the most of V3.

Thanks,

Marc

M3EST · 04-17-2008, 03:08 AM

Any idea how much will cost the V3 harness?

ArmyBimmerDude · 04-17-2008, 05:30 AM

Quote:

Originally Posted by jdink

can i also get a large chocolate milk shake and onion rings?

And people wonder why Americans are so fat.

ReAPEr -335i- · 04-18-2008, 11:36 PM

I have proCEDE V2 ordered and on its way. Just wondering if I should wait for the v3 update or go ahead and install the v2 and upgrade later.

Cant wait to learn more about this, pretty much a newb at the moment :P

kitw · 04-19-2008, 02:06 AM

Quote:

Originally Posted by Mr_T

Shiv,
1) High level improvements/benefits V3 has over V2.x on a stock 335i
2) Which Mods (DPs, Exhaust, Intakes - CAI, HVI, FMIC....etc) take further advantage which improvements, and if possible how.

I'm not Shiv... but be patient. You guys will be really impressed over what is coming.

FYi, my car has nothing but the PROcede V3. It's probably down 40-50whp on Shiv's car with downpipes, a catback exhaust, and cone intakes.

04-16-2008, 04:25 PM	#1
ohsnapITZe92 First Lieutenant 10 Rep 339 Posts Drives: 335i Join Date: Oct 2007 Location: cali iTrader: (0)	PROcede v3 clarification so ive just finished reading not even half of shiv's thread (pages and pages in less than a day...) on the new v3 and was somewhat confused. from what i have read and understood if we are currently running v2 we can upgrade to v3 with extra wires and ect. for a small price upgrade. but if we are not currently running v2 we can buy v3 as a PLUG AND PLAY? and if we are going to upgrade from a v2 to a v3... do we need a laptop for the upgraded software?
	Appreciate 0 Tweet Quote

04-16-2008, 04:28 PM	#2
Icyhot85 Private First Class 6 Rep 148 Posts Drives: 335XI Join Date: Jan 2008 Location: Suffolk County, NY iTrader: (0)	i think yes it will be plug and play as long as you have a standard procede vishnu 1.4 system __________________ 335xi//Procede V3//Lux 5.0//BMS Filter//19" CSL//LOVE FOR MY WHIP
	Appreciate 0 Quote

04-16-2008, 04:46 PM	#3
ohsnapITZe92 First Lieutenant 10 Rep 339 Posts Drives: 335i Join Date: Oct 2007 Location: cali iTrader: (0)	oh ok so the PNP isnt going to be exactly like a PNP like the SSTT then
	Appreciate 0 Quote

04-16-2008, 05:08 PM	#4
OpenFlash 1740 Rep 17,960 Posts Drives: A Lot Join Date: Sep 2006 Location: SF Bay, CA iTrader: (0) Garage List 2018 Ducati Panigal ... [0.00] 2016 Mazda CX5 [0.00] 2017 Aprilia Tuono ... [0.00] 2019 BMW M2 Competi ... [0.00] 2015 BMW M5 Competi ... [10.00] 2016 Ducati XDiavel S [0.00] 2016 AMG GT S [0.00] 2011 Ferrari 458 It ... [0.00] 2017 Charger Hellcat [0.00] 2015 KTM Super Duke ... [0.00] 2016 KTM RC390 [0.00]	v2.1 was an internal designation that was used only with beta testers. It will not exist in general When v3 is available, it can be had in either a plug-in kit (harness+PROcede) or as an inexpensive update kit for those who already have a v1 or v2 PROcede. This update kit consists of a few additional wire looms and an o2 sim harness. Functionally, it is 100% identical to the plug-in version. We will eventually offer the plug-in harness as an a la carte item. But this can only happen once we get further along into the manufacturing cycle. I hope this clears things up Shiv
	Appreciate 0 Quote

04-16-2008, 10:09 PM	#8
Mr_T Brigadier General 67 Rep 3,928 Posts Drives: Blindfolded Join Date: Jul 2007 Location: New Jersey, USA iTrader: (0)	Shiv, I'm sure you may have this in the works. I was wondering if you can possibly explain in somewhat simple terms: 1) High level improvements/benefits V3 has over V2.x on a stock 335i 2) Which Mods (DPs, Exhaust, Intakes - CAI, HVI, FMIC....etc) take further advantage which improvements, and if possible how. I think this would help some of us understand a bit more of what is being offered in V3 and how we can mod to make the most of V3. Thanks, Marc __________________ '07 E90 Jet Black/Black Leather \| ZSP\| ZPP \| ZCW \| AT \| Paddles \| Hartge Lip (Rep) \| Blacklines \| Ultimate Racing CAI \| PROcede v2.0.2-26
	Appreciate 0 Quote

04-17-2008, 03:08 AM	#9
M3EST Rear wheel drive fanatic 53 Rep 604 Posts Drives: M3 E30-1M-M4 Join Date: Nov 2006 Location: Greece & Germany iTrader: (1) Garage List 1987 BMW M3 [0.00] 2011 BMW 1M [10.00]	Any idea how much will cost the V3 harness?
	Appreciate 0 Quote

04-18-2008, 11:36 PM	#11
ReAPEr -335i- New Member 0 Rep 6 Posts Drives: 07' BMW 335i Join Date: Apr 2008 Location: Alberta, Canada iTrader: (0)	I have proCEDE V2 ordered and on its way. Just wondering if I should wait for the v3 update or go ahead and install the v2 and upgrade later. Cant wait to learn more about this, pretty much a newb at the moment :P __________________ 07' BMW 335i, Sapphire Black on Saddle Brown, 6MT
	Appreciate 0 Quote