05-04-2017, 11:37 PM | #1 |
Second Lieutenant
101
Rep 221
Posts |
m235i 2016 Dyno Results
Hey Guys,
So went and had a dyno done today at one of the local tuner places. Car is: 2016 - 235i VRSF DP BMS CIA Active AutoWerke IC JB4 Running 30% E85 rest 98. So I didnt do a stock run and I only wanted to do E85 runs so I only did runs with Map 2 and Map 5. I was surprised to see Map 2 came out a head by only the slightest margin. That said however I was still a little disappointed by the results. Map5 - 249 KW Map2 - 251.4 KW I was really expecting to hit somewhere around 265+ with the mods I have coupled with the E85. I was told however this particular Dyno does read 10% lower then most so that would place me in that range but without comparison I dont have anything to really go by. Further to this the guy at the place didnt know what gear to run it in so i suspect 3rd was what he ran, and I never got an accurate Torque readout either which is a little upsetting. I dont have a JB4 data cable so im unable to start logging. Let me know what you think about the numbers, and potentially what could be done next time if anything. |
05-05-2017, 09:49 AM | #2 |
IG @bmwF9xG80
3813
Rep 7,593
Posts
Drives: G80 M3, X4M, G07 X7m50
Join Date: Apr 2012
Location: NYC to NJ to Orlando FL
|
Since you're using a different Dyno other than Dynojet, you should of done a map4 run.
- Dyno + Log = A Must - I wouldn't be driving blindly without logging or seeing you have proper settings/adjustments and on latest firmware - Numbers don't mean anything without a baseline - find a Dynojet ; dyno in 4th or 5th gear u can dyno ; dsc off
__________________
60-130mph 6.5s X4M #HCP
60-130mph 5.0s G80 M3 #OrlandoAutowerks Sauce IG: @bmwF9XG80 |
Appreciate
0
|
05-05-2017, 11:05 AM | #3 |
Major General
5554
Rep 5,372
Posts |
~250KW is around 340whp which seems low for the fuel and mods. However, if they ran in 3rd, the numbers will be lower. Running in a gear closer to a 1:1 ratio should help push the numbers up 5% to 7% or so which would be about right (~365whp).
|
Appreciate
0
|
05-05-2017, 04:19 PM | #4 | |
Second Lieutenant
101
Rep 221
Posts |
Quote:
was speaking with Terry from burger, he advised Map 2 and 5. brand new jb4 so firmware is the newest. |
|
Appreciate
0
|
05-05-2017, 05:27 PM | #5 | |
Major
341
Rep 1,184
Posts |
Quote:
I am not sure that new tune necessarily means most up to date software. If distributor has jb4 in stock they are probably in storage waiting to be shipped. It may be "new" bit sitting in a box for the last couple months. New software comes out all the time. Does anyone know if jb4 are typically up to date when they ship out? I'd be curious to know. |
|
Appreciate
0
|
05-05-2017, 08:32 PM | #6 | ||
Captain
308
Rep 647
Posts |
Quote:
|
||
Appreciate
0
|
Post Reply |
Bookmarks |
|
|